Results 231 to 240 of about 21,417,156 (279)
Some of the next articles are maybe not open access.
Low-Temperature Impact Toughness and Deformation Mechanism of CT20 Titanium Alloy
Materials Characterization, 2023Wen-Xing Yang +2 more
exaly +2 more sources
Low Temperature Impact Toughness of High Strength Structural Steel
Thin-Walled Structures, 2018Abstract Impact toughness properties of four kinds of high strength steel (HSS) were investigated with the nominal yield strength 460, 690, 800 and 960 MPa, respectively. The specialty of impact toughness among base metal, heat affected zone (HAZ) and weld metal were also compared and discussed.
Xiao-Ling Zhao, Shuang Jing, Lewei Tong
exaly +2 more sources
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 2022
Abstract The influence of martensite morphology and volume fraction on low-temperature impact toughness of dual-phase (DP) steels was investigated by impact tests, nanoindentation tests, atom probe tomography (APT) and microstructural examination.
Laiqi Zhang
exaly +2 more sources
Abstract The influence of martensite morphology and volume fraction on low-temperature impact toughness of dual-phase (DP) steels was investigated by impact tests, nanoindentation tests, atom probe tomography (APT) and microstructural examination.
Laiqi Zhang
exaly +2 more sources
Impact Toughness of Q460 Frw for Building Structure at Low Temperature
2022The impact toughness test of 14 mm, 20 mm thickness 460 MPa anti-seismic and corrosion resistant and Fire-Resistant Weatherability steel (Q460 FRW) had been carried out on SANS pendulum impact tester at 20, 0, -20, -40, -60, -80, -100℃, Charpy impact power magnitude had been put into list and plotted out. The tensile test were applied at 20, -40℃.
zhiming wang +6 more
openaire +1 more source
Impact toughness of austenitic steels at low temperatures
Metal Science and Heat Treatment, 19671. If austenite undergoes no change in the impact test than the impact toughness decreases monotonically with decreasing temperatures. 2. The martensite forming during the test increases the work of formation of the crack but reduces the work of its propagation. The curves of the impact toughness have peaks.
A. P. Gulyaev, A. M. Minaev
openaire +1 more source
Enhanced low-temperature impact toughness of nanostructured Ti
Applied Physics Letters, 2006Impact toughness is one of the major mechanical properties for structural materials. It is generally observed that in coarse-grained materials the impact toughness decreases with decreasing testing temperature. Here, we report that the impact toughness of nanostructured Ti processed by severe plastic deformation is enhanced at low temperatures of −70°C
V. V. Stolyarov, R. Z. Valiev, Y. T. Zhu
openaire +1 more source

