Results 51 to 60 of about 10,189,523 (145)
Assessment of Durability of the Toothed Segment Based on FEM Analysis and Low Fatigue Cycle Test
The development of a novel design for the toothed segment of drive transmission in longwall shearer is expected to significantly reduce the cost of individual components of the feed system and the related work of repair and renovations, increasing at the
Piekło J., Maj M., Żuczek R., Pysz S.
doaj +1 more source
Cumulative Damage in Very High/Low Cycle Combined Fatigue for TC21 Titanium Alloy
The effect of low cycle fatigue (LCF) predamage with no precracks on very high cycle fatigue (VHCF) properties, and crack initiation characteristics for TC21 titanium alloy, was investigated.
Baohua Nie +7 more
doaj +1 more source
Study on high-low cycle fretting fatigue life of Inconel718 tenon structure
The turbine blades of aero-engines are subjected to cyclic high-low cycle loads in actual service environments,which is a typical high-low cycle micro motion fatigue condition. The frequent occurrence of fatigue fracture in turbine blades due to fretting
YANG Xiaolin +3 more
doaj +1 more source
Multiaxial Low Cycle Fatigue Life Prediction under N onproportional Loading [PDF]
This paper studies the effect of nonproportional straining on tension-torsion low cycle fatigue lives of two types of materials. Extensive low cycle fatigue tests under 14 proportional and non-proportional strain paths were carried out using Type 304 ...
ITOH, Takamoto
core
Micro-Deformation and Fracture Features of Ti834 Titanium Alloy under Fatigue Loading
A sustained load holding period imposed during fatigue loading is detrimental to material performances, causing a sharp decline in the fatigue life of near-α titanium alloys.
Ning Wang +4 more
doaj +1 more source
Notch Effect on Torsional Low-Cycle Fatigue
Öz bulunamadı.
GEVREK, M, GULEC, S
openaire +2 more sources
Modified low-cycle fatigue (LCF) test
The fatigue test results obtained by the common low-cycle fatigue test (LCF) and its modified MLCF counterpart were presented. A satisfactory agreement of results was achieved for the two selected materials. With the MLCF method it is possible to examine
M. Maj +3 more
doaj
Low-cycle fatigue behavior and microstructure evolution of ODS steel pipes at high temperatures
Oxide-dispersion-strengthened (ODS) steels are candidate materials for application in advanced nuclear reactors. In this study, the low-cycle fatigue performances of 13Cr-ODS ferritic steel pipes were investigated at 600, 700, and 800 °C.
Yuntao Zhong +6 more
doaj +1 more source
Effect of welding defects on fatigue behavior of Ni-base superalloy GH4065A
The spot-welding defects of highly alloyed Ni-base superalloy GH4065A were investigated by using SEM and EBSD analysis methods. Effects of the welding defects on fatigue life and fracture behavior were studied by comparing thin plate samples with a ...
LI Linhan +6 more
doaj +1 more source
In the present article, the low-cycle fatigue lifetime of carbon/epoxy laminated composites has been investigated. The sensitivity analysis has been also performed to study effects of the displacement amplitude and the loading frequency on the low-cycle ...
Azadi Mohammad +2 more
doaj +1 more source

