Results 1 to 10 of about 4,483 (266)
Journal of Manufacturing and Materials Processing, 2021 Some manufacturing companies now use recycled aluminum alloys. It is important that they have the necessary data relating to the control of the machinability of these alloys.
Jean Brice Mandatsy Moungomo +2 more
doaj +1 more source
Influence of inoculation on cast iron machinability: Case studies [PDF]
China Foundry, 2020 Machinability can sometimes be difficult to predict and be impacted by different characteristics of the castings. Inoculation, a key step in foundry process, is well-known to be a powerful tool to adjust the characteristics of castings in both grey and ...
Aurélie FAY
doaj +1 more source
Mechanical Properties, Machinability and Corrosion Resistance of Zamak5 Alloyed by Copper [PDF]
Archives of Metallurgy and Materials, 2023 Due the importance of using commercially Zamak5 in a wide range in industrial applications, however, this study was focused on the enhancing its machining issues by adding pure copper, so the effect of the addition of (1 to 3)% Cu to commercially Zamak5 ...
Ahmad Al Aboushi +3 more
doaj +1 more source
Journal of Materials Research and Technology, 2022 High-entropy alloy (HEA) belongs to the emerging multi-principal alloy with excellent mechanical-physical properties. The material machinability is critical for cutting planning, especially for novel materials with various chemical compositions and ...
Xiaoliang Liang +3 more
doaj +1 more source
PROPERTIES OF AUSTENITE STAINLESS STEEL MICROALLOYED WITH TELLURIUM AND ZIRCONIUM
Journal of Sustainable Technologies and Materials, 2021 Stainless steel X8CrNiS18-9 (standard EN 10088-3: 2005) is the most commonly used austenitic stainless steel due to its good machinability. This steel has high mechanical and working properties thanks to a complex alloying, primarily with the elements ...
Derviš Mujagić +2 more
doaj +1 more source
The effect of Titanium Alloy Composition and Tool Coating on Drilling Machinability [PDF]
MATEC Web of Conferences, 2020 Excessive tool wear and poor machinability is observed in the machining of high strength, near-β titanium alloys when compared to α + β titanium alloys such as Ti-64.
Graves Alex +4 more
doaj +1 more source
Modeling and Optimization of Steel Machinability with Genetic Programming: Industrial Study
Metals, 2021 In this paper, machinability influences from the start to end of final product production in a steel plant were analyzed, including chemical composition, deoxidizing agents and casting parameters, which drastically influence the macrostructure and ...
Miha Kovačič +3 more
doaj +1 more source
TELLURIUM MICROALLOYING OF AUSTENITE STAINLESS STEEL X8CrNiS18-9
Journal of Sustainable Technologies and Materials, 2023 More recently modified stainless steels have been used to produce various structural elements that work in complex operating conditions. Stainless steel X8CrNiS18-9 (standard EN 10088-3) is the most commonly used from the group of austenitic stainless ...
Derviš Mujagić +2 more
doaj +1 more source
A study on the machinability of some metal alloys using grey TOPSIS method [PDF]
Decision Science Letters, 2016 The machinability of a material can be defined as the ease with which it can be machined. Materials with good machinability property require less power to cut, can be cut quickly, and easily obtain a good finish without wearing the tooling much ...
Swarat Dey, Shankar Chakraborty
doaj +1 more source
Investigation of the Effect on Copper and Silicon Additives on Machinability in Turning of Al-25Zn Alloy with CVD-Al2O3 Coated Tools [PDF]
Gazi Üniversitesi Fen Bilimleri Dergisi, 2020 In this study, the effect of copper (Cu) and silicon (Si) additives on mechanical and machinability properties of Al-25Zn alloy was investigated experimentally.
Şenol BAYRAKTAR +2 more
doaj +1 more source