Results 71 to 80 of about 25,849 (309)
Effect of Gd addition on the age hardening response of Mg–6Zn-1Mn alloy
Journal of Materials Research and Technology, 2020 The effect of Gd addition on the microstructure and mechanical properties of as-aged Mg–6Zn-1Mn (ZM61) alloy were investigated. The results showed that coarse second phase particles containing both Zn and Gd elements were detected after the addition of ...
Yang Zhao +6 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.Powder metal processing provides scalable advantages in nanoporous (np) metal development. Mechanical alloying is used to produce unique precursors for hybrid nanopore formation by oxide reduction and dealloying. As demonstrated in np Ag, this approach improves process efficiency while promoting smaller ligaments and larger pores, both of which are ...
Mark A. Atwater, Oliver A. Fowler
wiley +1 more source
Semisolid processing characteristics of AM series Mg alloys by rheo-diecasting
, 2006 The official published version of this Article can be found at the link below - Copyright @ 2006 ASM InternationalAn investigation has been made into the solidification behavior and microstructural evolution of AM50, AM70, and AM90 alloys during rheo ...
Ji, S +8 more
core +1 more source
Advanced Engineering Materials, EarlyView.This study explores the lightweight potential of laser additive‐manufactured NiTi triply periodic minimal surface sheet lattices. It systematically investigates the effects of relative density and unit cell size on surface quality, deformation recovery, compression behavior, and energy absorption.
Haoming Mo +3 more
wiley +1 more source
Journal of Materials Research and Technology, 2020 The microstructure evolution and age hardening behavior of Mg-6Zn-1Mn-4Sn (wt.%, ZMT614) through various Gd addition were investigated. The as-cast ZMT614 alloy was mainly composed of Mg2Sn, Mg7Zn3 and α-Mg solid solution, and new MgSnGd phases were ...
Yang Zhao +7 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.The corrosion performance of AlSi7Mg and AlSi10Mg alloys produced through selective laser melting (SLM) was examined under compressive stress in a chloride environment. Electrochemical analyses, including open‐circuit potential (OCP), potentiodynamic polarization (CPP), and electrochemical impedance spectroscopy (EIS), were complemented by scanning ...
Femi John Akinfolarin +2 more
wiley +1 more source
Residual stress evolution analysis in AZ31 friction stir welds using X-Ray and neutron diffraction [PDF]
, 2009 This work was performed as a part of AEROMAG Project"Aeronautica lApplication of Wrought Magnesium" (project N°AST4-CT-2005 -516152) which was supported by the European Union.The authors wish to thank EADS-I W F, Suresnes for Friction Stir Welding,Robert
COMMIN, Loreleï +2 more
core
Selective Laser Melted Magnesium Alloys: Fabrication, Microstructure and Property
, 2022 As the lightest metal structural material, magnesium and its alloys have the characteristics of low density, high specific strength and good biocompatibility, which gives magnesium alloys broad application prospects in fields of biomedicine ...
Kai Zhang +9 more
core +1 more source
Features and classification of solid solution behavior of ternary Mg alloys
Journal of Magnesium and AlloysThe performance of Mg alloys is significantly influenced by the concentrations and solid solution behavior of the alloying elements. In this work, the solid solution behavior of 20 alloying elements in 190 ternary Mg alloy systems at 500 °C are ...
Tao Chen +8 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.This study explored how effective nickel aluminide coatings are obtained in providing oxidation resistance applied to the Inconel 738 alloy, modeling with diffusion models. In the present study, kinetics and thermal behavior of the Inconel 738 alloy were studied by the low‐temperature thermoreactive aluminizing process, which was carried out at 625°C ...
Gozde Celebi Efe +4 more
wiley +1 more source