Results 91 to 100 of about 4,070 (230)

Alloy Qualification for Producing Quench and Tempered Plate Steels with Extra‐Heavy Gage

steel research international, EarlyView.
This study develops alloy concepts for ultraheavy steel plates (>100 mm) with ≥690 MPa yield strength. Through dilatometry and Jominy testing, the effects of Mo, Ni, and B on hardenability are quantified. A synergy between 0.5% Mo and 0.5%–1.0% Ni ensures core strength at low cooling rates, while boron microalloying suppresses ferrite and promotes ...
Xabier Azpeitia, Unai Mayo, Nerea Isasti, Eric Detemple, Hardy Mohrbacher, Pello Uranga   +5 more
wiley   +1 more source

Amorphous martensite in β-Ti alloys

Nature Communications, 2018
Displacive martensitic transformations through lattice distortion usually involve a change from one crystal structure to another. Here however, the authors “melt” metastable Ti alloys during cooling and show that a martensitic transformation can lead to ...
Long Zhang, Haifeng Zhang, Xiaobing Ren, Jürgen Eckert, Yandong Wang, Zhengwang Zhu, Thomas Gemming, Simon Pauly   +7 more
doaj   +1 more source

HWTS 50 Tool Steel Tailored for Laser Powder Bed Fusion: Sliding Wear of Bare Surfaces and Nitriding Response in Comparison with 18Ni300 and AISI H13

steel research international, EarlyView.
This work investigates the wear resistance and nitriding behavior of PBF‐LB/M‐processed Osprey HWTS 50, a lean hot work tool steel. Three heat treatment conditions are compared to conventional wrought H13, H11, and PBF‐LB/M 18Ni300. The study highlights HWTS 50's enhanced nitrogen diffusion, deeper nitriding hardness depth, and comparable or improved ...
Jonathan Hann, Giorgia Lupi, Sylvain Dossin, Riccardo Casati, Mandanà Moshiri, Arne Röttger, Faraz Deirmina   +6 more
wiley   +1 more source

Fatigue Strength in Additive Toolmaking: A Study of Metal Binder Jetting and Electron Beam Melting for Processing Carbide‐Rich Cold‐Work Tool Steels

steel research international, EarlyView.
Focusing on the critical tap hole region of the blast furnace, this work examines binder characteristics, prepares tap hole clay with different formulations, and evaluates their physical properties. The findings confirm the advantages of composite binders and offer a new binder option for tap hole clay.
Frederik Tegeder, Lennart Mirko Scholl, Sandra Wieland, Christian Weck, Marie Franke‐Jurisch, Alexander Bezold, Thomas Weißgärber, Christoph Broeckmann   +7 more
wiley   +1 more source

In Situ Alloying of H13 Tool Steel With TiC via PBF‐LB/M

steel research international, EarlyView.
H13 tool steel is in situ alloyed with titanium carbides (TiC) in amounts up to 30 wt.%. This approach offers the advantage that the carbides melt only partially during processing, preventing excessive carbon enrichment of the steel matrix. The resulting microstructure consists of coarse, undissolved and fine, reprecipitated carbides, leading to grain ...
Oliver Bürgi, Anke Kaletsch, Christoph Broeckmann   +2 more
wiley   +1 more source

Microstructure, Defects, and Fatigue Response of High‐Strength Tool Steels

steel research international, EarlyView.
The martensitic tool steel family is designed for use in various working environments where they are subjected to repeatedly high mechanical loads. Despite the continuous upgrade of material´s microstructures through compositional development or processing techniques, defects remain a critical factor for the tool performance by leading to fatigue ...
Katerina Chantziara, Jens Bergström, Dimitrios Nikas, Mikael Thomas Grehk   +3 more
wiley   +1 more source

Tailoring Laser Powder Bed Fusion and Post‐Processing Parameters for JIS SKD61 Tool Steels: Surface Roughness, Microstructure, and Mechanical Properties

steel research international, EarlyView.
Laser powder bed fusion of JIS SKD61 tool steel is systematically optimized using a Taguchi design and ANOVA. Hatch spacing and layer thickness are identified as dominant parameters controlling surface roughness and tensile strength. Subsequent tempering at 600°C improves microstructural stability and mechanical performance, enabling high‐density SKD61
Masrurotin Masrurotin, Andi Ard Maidhah, Maziar Ramezani, Wojciech Macek, Cho‐Pei Jiang   +4 more
wiley   +1 more source

Toward the Application of Multiaxial Failure Criteria: Mean Stress Sensitivity of Carbide‐Rich, High‐Alloy PM‐HIP Tool Steels Under Axial and Torsional Cyclic Loading

steel research international, EarlyView.
This study quantifies axial and torsional long‐life fatigue (LLF) behavior of three carbide‐rich PM‐HIP tool steels, correlating LLF strength with intrinsic defect size and cleanliness, thereby extracting material‐specific mean stress sensitivities and Haigh diagrams.
Lennart Mirko Scholl, Frederik Tegeder, Tobias Hajeck, Alexander Bezold, Christoph Broeckmann   +4 more
wiley   +1 more source

Phase Transformation Behavior of Continuously Cooled Fe–C–V–(Mo) Alloys

steel research international, EarlyView.
Additions of vanadium and molybdenum microalloying are shown to reshape phase transformations in clean low‐carbon steels. By tracking microstructural shifts during continuous cooling, the work uncovers the correlation between transformation kinetics, ferrite morphology, and hardness.
Anastasiya Tselikova, Jannik Zuraszek, Ulrich Krupp, Rolf Schmidt, Hardy Mohrbacher, Alexander Gramlich   +5 more
wiley   +1 more source

Effect of matrix dislocation strengthening on deformation-induced martensitic transformation behavior of metastable high-entropy alloys

Materials Research Letters
In this study, we investigate the influence of dislocation strengthening in the metastable parent phase on the deformation-induced martensitic transformation behavior of a face-centered cubic (fcc) Co20Cr20Fe34Mn20Ni6 high-entropy alloy. Annealed and hot-
Kenta Yamanaka, Manami Mori, Daishin Yokosuka, Kazuo Yoshida, Yusuke Onuki, Shigeo Sato, Akihiko Chiba   +6 more
doaj   +1 more source