Results 71 to 80 of about 2,467 (200)

Monitoring Resin Cure Of Medium Density Fiberboard Using Dielectric Sensors

, 1996
Flush mounted, in-press microwave (600–800 MHz) sensors have been developed for monitoring the complex permittivity in real time during the cure of medium density fiberboard.
R. W. Rice, R. J. King
core   +1 more source

Cutting Forces and Chip Morphology in Medium Density Fiberboard Orthogonal Cutting

BioResources, 2014
The influence of rake angle, cutting speed, and uncut chip thickness on cutting forces and chip morphology in medium density fiberboards orthogonal cutting was investigated.
Yu Teng, Jianwen Ding, Baojin Wang, Xiaolei Guo, Pingxiang Cao   +4 more
doaj   +1 more source

Evaluation of Banana Pseudostem Fibres for Packaging Material Development

Packaging Technology and Science, Volume 39, Issue 1, Page 91-103, January 2026.
Composites were developed from banana pseudostem fibres, extracted from a thermomechanical method to produce pulp, which was subsequently hot‐pressed with gum arabic to form fibreboards intended as sustainable packaging material. ABSTRACT The present study investigated composites prepared from banana pseudostem fibres (BF) and gum arabic (GA), in ...
Sérgio Ambrósio Sangarote, Antonio Gomes Soares, Elen Beatriz Acordi Vasques Pacheco, Otniel Freitas‐Silva   +3 more
wiley   +1 more source

Impact of Common Indoor Materials on 77–81 GHz mmWave Radar Performance: Signal Behaviour, Attenuation and Reflection Characteristics

IET Radar, Sonar &Navigation, Volume 20, Issue 1, January/December 2026.
This paper investigates the impact of common indoor materials on mmWave radar signal behaviour at 77–81 GHz. Experimental results quantify material‐dependent attenuation and reflection effects under line‐of‐sight and non‐line‐of‐sight scenarios, providing actionable guidance for radar deployment and indoor sensing applications.
Mashal Al Bimani, Salem Aljareh, William Dawber   +2 more
wiley   +1 more source

Impact of Lignin on Water Absorption and Thickness Swelling of Particleboard: A Comprehensive Review

Advances in Materials Science and Engineering, Volume 2026, Issue 1, 2026.
This article focuses on lignin and its interaction with water, which is a critical aspect of various applications and modification of lignin. Efforts to formulate particleboards suitable in a moisturized environment have been a problem in manufacturing industries.
Susan Wanja Kamande, Stephen Warui Kariuki, Genson Murithi, Mohammad Rezwan Habib   +3 more
wiley   +1 more source

The Removal of Cured Urea-Formaldehyde Adhesive towards Sustainable Medium Density Fiberboard Production: A Review

, 2021
Medium density fiberboard (MDF) is an engineered wood product that has density and specific gravity similar to solid wood, ranging from 600 to 800 kg/m3 of density and 0.6 to 0.8 of specific gravity.
Sari, Fahriya Puspita, Hidayat, Wahyu, Raden Permana Budi Laksana, Faizatul Falah, Fahriya Puspita Sari, Yadav, Sumit Manohar, Sumit Yaday Manohar, Nissa Nurfajrin Solihat, Widya Fatriasari, Laksana, Raden Permana Budi, Lubis, Muhammad Adly Rahandi, Solihat, Nissa Nurfajrin, Fatriasari, Widya, Wahyu Hidayat, Ismayati, Maya, Falah, Faizatul, Muhammad Adly Rahandi Lubis, Maya Ismayati   +17 more
core   +1 more source

Evaluation of Material Properties of Acetylated Medium Density Fiberboard (MDF)

Journal of the Korean Wood Science and Technology, 2020
아세틸화 처리한 라디에타소나무 섬유를 사용하여 제조한 MDF의 수분에 대한 재질 특성을 조사하고 KS F 3200의 섬유판 품질기준과 비교하였다. 아세틸화 처리 MDF는 품질 기준보다 매우 낮은 함수율과 수분 흡수성 및 두께 팽창율을 보여 우수한 치수안정성을 기대할 수 있다. 아세틸화 처리 MDF의 습윤 시 휨강도는 기건 상태 휨강도의 약 70% 이상에 달해 품질 기준에 적합하였다. 아세틸화 MDF의 습윤 시 박리강도가 품질기준의 기건 상태의 최저 박리강도보다 높은 결과를 보여 내수성이 매우 우수하였다. 아세틸화 MDF의 물방울 접촉각은 무처리 MDF에 비하여 커서 낮은 습윤성에 의한 내수성 향상에 기여하는 것으로 판단된다.
Jong Shin LEE, Soung Joon KIM
openaire   +2 more sources

Assessment of Life Safety Risk in Building Fires With an Integrated Fire and Evacuation Model

Discrete Dynamics in Nature and Society, Volume 2026, Issue 1, 2026.
This paper presents an integrated simulation methodology that combines fire hazard modeling with pedestrian evacuation analysis to evaluate how tenability conditions affect occupant egress. In the proposed approach, fire scenarios representative of leisure and spa resorts are modeled using the Fire Dynamics Simulator (FDS).
Roberto Bellas, Arturo González-Gil, Jacobo Porteiro, José L. Míguez, Miguel A. Gómez, Deepali   +5 more
wiley   +1 more source

Properties of medium density fiberboard from rubberwood and leucaena in relation to wood ratio and resin content / Nur Othman Suratman [PDF]

, 2015
Properties of Medium Density Fiberboard (MDF) from Rubberwood and Leucaena In Relation to Wood Ratio and Resin Content This study used Leucaena and rubberwood species as the raw materials in the manufacture of medium density fiberboard (MDF).
Suratman, Nur Othman
core  

ELECTRON BEAM CURING OF EPOXY ACRYLATE COATINGS ON MEDIUM-DENSITY FIBERBOARD

Indonesian Journal of Chemistry, 2010
Most of the medium-density fiberboard (MDF) as an engineered woods need surface coating process before entering final products, such as furniture and building materials. The wood surface should be covered for surface protection from damage during service
Sugiarto Danu, Darsono Darsono
doaj   +1 more source