Results 21 to 30 of about 7,956 (219)

Medium density fiberboard manufactured with castor oil based polyurethane resin

open access: yesVértices, 2013
This study aimed at evaluating the feasibility of manufacturing MDF panels with Pinus caribaea and Eucalyptus grandis wood species, and mono and bi-component castor oil based polyurethane resins, according to the Euro MDF Board (EMB/IS-2:1995) standard ...
Sérgio Augusto Mello da Silva   +3 more
doaj   +3 more sources

Effect of Sanding on Surface Properties of Medium Density Fiberboard [PDF]

open access: yesDrvna Industrija, 2010
The objective of this research was to investigate the effects of sanding on the surface properties of the medium density fiberboard (MDF) panels made from Rhododendron ponticum L. wood.
Nadir Ayrilmis, Zeki Candan, Turgay Akbulut, Ozgur Balkiz
doaj   +1 more source

Effect of Epoxy Resin Reinforcement on Screw Withdrawal Strength of Fiberboard and Particleboard Used in Furniture Industry

open access: yesDrvna Industrija, 2023
The study aimed to increase the screw withdrawal strength of medium density fiberboard and particleboard used in furniture strength by using epoxy resin in the screw pilot hole.
Mesut Uysal   +2 more
doaj   +1 more source

A dialdehyde starch-based adhesive for medium-density fiberboards

open access: yesBioResources, 2023
Bio-based adhesives have gained considerable attention in the last years as more sustainable and healthier alternatives to the formaldehyde-based adhesives used today in wood-based panel manufacturing. In this study, dialdehyde starch (DAS) with various aldehyde contents was prepared by using sodium metaperiodate as an oxidizing agent ...
Neitzel, Nicolas   +2 more
openaire   +5 more sources

Medium Density Fiberboard from Quercus robur [PDF]

open access: yesJournal of Applied Sciences, 2007
The objective of this study was to investigate the suitability of oak (Ouercus robur L.) wood fibers from Turkey as a raw material for medium density fiberboard. In this study, some of the oak wood parts that are especially not suitable for other forest industries was utilized to produce fiberboards in laboratory environment.
Akgül, Mehmet   +4 more
openaire   +2 more sources

Comparison of Carbonaceous Compounds Emission from the Co-Combustion of Coal and Waste in Boilers Used in Residential Heating in Poland, Central Europe

open access: yesEnergies, 2021
In this study, the effect of the addition of waste on the emissions from coal co-combustion was investigated. Coal was co-combusted with different additions of medium-density fiberboard and polyethylene terephthalate plastic (10 and 50%), in a low-power ...
Marianna Czaplicka   +4 more
doaj   +1 more source

The Investigation of Press Temperature and Time on Properties of Medium Density Fiberboard Produced From Cotton Stalks Fibers [PDF]

open access: yesتحقیقات علوم چوب و کاغذ ایران, 2016
The objective of the present study was the utilization of cotton stalk residues for medium density fiberboard production. MDF was produced applying Three press temperatures (170, 180, and 190 oC ) and three pressing times (3,4 and 5 minutes) were used to
Abolfazl Kargarfard, Amir Nourbakhsh
doaj   +1 more source

Burning "ExposHome": Deriving a Mixture of Combustible Materials in American Homes at the Wildland-Urban Interface for Health Studies. [PDF]

open access: yesGeohealth
Abstract Approximately 39% of U.S. homes are now located in the Wildland‐Urban Interface (WUI) and are at elevated risk of burning during wildfires. WUI fires emit a cocktail of chemicals from the combustion of anthropogenic materials, including compounds that may differ from the burning of biogenic‐only materials.
Chou CK   +7 more
europepmc   +2 more sources

Recycling of Powders from Cutting of Medium Density Fiberboard

open access: yesKey Engineering Materials, 2022
Medium density fiberboard (MDF) is a wood-based engineered material, largely implemented in the manufacturing of in-house structures. Large panels are usually manufactured and shaped via machining; in this way powders are produced. Dismissed structures can also be pulverized to facilitate transportation of waste.
Quadrini F.   +5 more
openaire   +2 more sources

Evaluating the quality of the medium density fiberboard made from kenaf core and stalk [PDF]

open access: yesتحقیقات علوم چوب و کاغذ ایران, 2013
Utilization of kenaf core and stalk for the production of medium density fiberboard was investigated. Control boards were produced using poplar wood fibers and compared with kenaf boards. Urea formaldehyde resin was used.
ّFahimeh Shabanalizadeh   +3 more
doaj   +1 more source

Home - About - Disclaimer - Privacy