Results 81 to 90 of about 172,368 (214)

Low addition of melamine salts for improved Melamine-Urea-Formaldehyde adhesives water resistance

open access: yes, 2003
The addition of melamine acetate salts to an adhesive glue mix can allow the use of melamine–urea– formaldehyde (MUF) resins of lower melamine contents (rather than just urea–formaldehyde resins) and lower total amounts of melamine.
PIZZI A., ZANETTI, MICHELA
core  

Surface properties of MDF coated with calcite/clay and effects of fire retardants on these properties

open access: yesMaderas: Ciencia y Tecnología, 2012
The coating of wood and wood panel surfaces basically serves for surface protection and its surface can be improved at various user areas. Different application methods are used for the coating of MDF surface.
Abdullah Istek   +2 more
doaj  

Relation of transverse air permeability with physical properties in different compositions of sugarcane bagasse particleboards

open access: yesMaterials Research, 2012
Studies concerning the production of particleboards with sugarcane bagasse as an alternative fibrous material have been carried out as an attempt to provide a sustainable and viable destination for this residue.
Lina Bufalino   +5 more
doaj   +1 more source

Surface properties of mdf coated with calcite/cla y and effects of fire retardants on these properties

open access: yesMaderas: Ciencia y Tecnología, 2014
The coating of wood and wood panel surfaces basically serves for surface protection and its surface can be improved at various user areas. Different application methods are used for the coating of MDF surface.
Abdullah Istek   +2 more
doaj  

Formulation of melamine urea formaldehyde (MUF) resin by using various types of filler [PDF]

open access: yes, 2012
The performance of adhesive in term of working properties and quality is improved by the types of material use as filler. Industrial Flour (IF), Pre treatment and post treatment Palm Kernel Meal (PKM) and Palm Kernel Cake (PKC) are chosen for this ...
Norliza, Ishak
core  

Effects of Addition Ammonia Modified Urea-Melamine-Formaldehyde Resin on the Adhesions and Formaldehyde Emission in Plywood

open access: yes, 2010
This study was carried out to investigated the effect of addition ammonia which concentration is 20 percent modified urea-melamine-formaldehyde resin on the formald-ehyde emission and internal bonding strength, when hotpress temperature, time and ...
Sheng You Ye, Jun You Shi
core   +1 more source

SHEAR STRENGTH OF HEAT-TREATED TALI (ERYTHROPHLEUM IVORENSE) AND IROKO (CHLOROPHORA EXCELSA ) WOODS, BONDED WITH VARIOUS ADHESIVES

open access: yesBioResources, 2009
The aim of this study was to evaluate the effect of heat treatment on the shear strength of tali (Erythrophleum ivorense) and iroko (Chlorophora excelsa) woods, bonded with some structural adhesives.
Hamiyet Sahin Kol   +2 more
doaj  

Effects of Steaming, Drying Temperature, and Adhesive Type on Static Bending Properties of LVL made of Picea orientalis and Abies nordmanniana veneers

open access: yesBioResources, 2014
The modulus of elasticity (MOE) and modulus of rupture (MOR) were evaluated for laminated veneer lumber (LVL) in static bending. The studied species were spruce (Picea orientalis) and fir (Abies nordmanniana) originated from the Eastern Black sea region ...
Huseyin Peker, Hüseyin Tan, Nadir Ersen
doaj   +1 more source

Thermal behavior of modified urea-formaldehyde resins

open access: yes, 2010
The thermal stability of pure urea-formaldehyde resin (PR) and modified urea-formaldehyde (UF) resins with hexamethylenetetramine-HMTA (Resin 1), melamine-M (Resin 2), and ethylene urea (EU, Resin 3) including nano-SiO2 was investigated by non-isothermal
Konstantinovic, Sandra   +9 more
core   +1 more source

Home - About - Disclaimer - Privacy