Results 11 to 20 of about 3,041 (191)
Separations, 2022 The objective of this study was to develop a novel melamine-based resin suitable for producing formaldehyde-free leather with improved retanning properties. The resin was prepared by optimized condensation of melamine, glyoxal and metanilic acid.
Muhammad Naveed Ashraf +5 more
doaj +1 more source
Microencapsulation of Butyl Stearate as Phase Change Material by Melamine Formaldehyde Shell for Thermal Energy Storage [PDF]
Journal of Chemical and Petroleum Engineering, 2017 Butyl stearate as a phase change material was microencapsulated within melamine-formaldehyde resin using emulsion polymerization. Morphology and thermal specification of produced microcapsules were studied by Fourier transform infrared spectroscopy, FT ...
Mohammad Hassan Vakili, Mina Jahanfar
doaj +2 more sources
Forestist, 2004 In this study, influence of melamine formaldehyde addition into the urea formaldehyde adhesive on some physical (thickness swelling) and nıechanical (static bending, modulus of elasticity and internal bond) properties of particleboard was investigated.
Gökay NEMLİ, Turgay AKBULUT
doaj +1 more source
Dose-Response, 2021 In February 2021, the Netherlands Food and Consumer Product Safety Authority came out with their risk assessment on formaldehyde exposure from melamine crockery with bamboo fiber to especially young children.
Jaap C. Hanekamp
doaj +1 more source
MIGRATION OF MELAMINE AND FORMALDEHYDE FROM KIDS' BAMBOO DINNER SETS
Food and Environment Safety, 2021 In recent years, products resembling the composition and / or appearance of plastic materials have been available on the market, which are actually made of a material containing various fillers and additives, such as melamine-formaldehyde resin, bamboo ...
Svetla Petrova PETROVA +1 more
doaj
BioResources, 2016 Scots pine and white poplar were modified with melamine formaldehyde (MF) and melamine-urea formaldehyde (MUF) resins to improve their physical and mechanical properties. Impregnation was conducted at 4 bar pressure for 30 or 60 min, and the samples were
Suat Altun, Veysel Tokdemir
doaj +1 more source
Jurnal Penelitian Hasil Hutan (Journal of Forest Products Research), 2017 The problem in using plywood bonded with urea formaldehyde (UF) is formaldehyde emission, especially in a room with limited ventilation. To reduce formaldehyde emission, the glue can be mixed with catching agent.
Paribotro Sutigno, Adi Santoso
doaj +1 more source
BioResources, 2015 Melamine-urea-formaldehyde (MUF) resin was synthesized by adding melamine with a first and second portion of urea, named M1 and M2, respectively. Different allocation proportions of M1:M2 (4:0, 3:1, 2:2, 1:3, and 0:4) were used to develop five MUF (MUF-1,
Jianlin Luo +4 more
doaj +1 more source
Jurnal Penelitian Hasil Hutan (Journal of Forest Products Research), 2017 The formaldehyde emtsston of particleboard bonded with urea formaldehyde (UF) can affect health, especially if it is used in a room with limited ventilation. To reduce formaldehyde emission, the glue can be mixed with catching agent.
Paribotro Sutigno, Adi Santoso
doaj +1 more source
Synthesis and Characterization of Sucrose-Melamine-Formaldehyde Adhesives
BioResources, 2016 The objective of this project was to use sucrose as a partial substitute for melamine in the synthesis of sucrose–melamine-formaldehyde (SMF) resin. The SMF was synthesized in a base condition.
Weixing Gan +6 more
doaj +1 more source