Results 151 to 160 of about 659 (179)
Surface Roughness, Dynamic Wettability, and Interphase of Modified Melamine Formaldehyde-Based Adhesives on Jabon Wood. [PDF]
Polymers (Basel)Amin Y +6 more
europepmc +1 more source
Upcycling Calcium Carbonate as an Alternative Filler in Layered Wood Composite Technology. [PDF]
Materials (Basel)Dasiewicz J, Kowaluk G.
europepmc +1 more source
Thermoregulatory Performance and Thermal Comfort Analysis of Phase-Change Fiber Seamless Knitted Fabrics. [PDF]
Materials (Basel)Cheng J, Chang L, Fei J, Jin Z, Zhao M.
europepmc +1 more source
Advanced Materials Research, 2011 New composite foams were prepared by using Melamine-Urea-Formaldehyde (MUF) resin and wood pulp fiber as raw materials with co-foaming method at 70°C in the opening mould. The study of the composites foam microstructure showed good adhesion between MUF matrix foam and wood pulp fiber.
Chun Peng Wang +2 more
exaly +3 more sources
International Journal of Adhesion and Adhesives, 2019 Abstract Melamine-urea-formaldehyde (MUF) resins are commonly used in the production of wood-based panels. The composition of the resin influences many properties of the final product. In industrial production, some properties, such as viscosity, pH, solid content, or molar ratio, are assessed after resin production in order to evaluate if they are ...
Miguel Gonçalves +5 more
openaire +3 more sources
Some of the next articles are maybe not open access.
Related searches:
Related searches:
Curing behavior of melamine-urea-formaldehyde (MUF) resin adhesive
International Journal of Adhesion and Adhesives, 2015Abstract In this work, MUF resin was tested by DMA method. It showed that G ′ curves and strain curves together could be used to predict the curing behavior of MUF resins. The study showed that sequential formulation was preferred for the preparation of MUF resins. Hardener could accelerate the curing of MUF resins.
Hong Lei, Charles E Frazier
exaly +2 more sources
Materials Today: Proceedings, 2020
Abstract Now a day’s many researchers are trying to build alternative materials for raw wood, by using wood composite materials as an alternative. However, in wood polymer composites major limitations on adhesive materials and its bonding strength effect with economy.
M Nagamadhu, G C Mohan Kumar
exaly +2 more sources
Abstract Now a day’s many researchers are trying to build alternative materials for raw wood, by using wood composite materials as an alternative. However, in wood polymer composites major limitations on adhesive materials and its bonding strength effect with economy.
M Nagamadhu, G C Mohan Kumar
exaly +2 more sources
Advanced Materials Research, 2011 New composite foams were prepared by co-foaming of Melamine-Urea-Formaldehyde (MUF) resin and wood fiber in the closed mould at 70°C. The effects of amount of wood fiber on mechanical properties, brittleness, flame-retardant, insulation and microscopic structures of wood fiber-MUF foam were investigated.
Yu Feng Ma +6 more
openaire +2 more sources
Journal of Cleaner Production, 2015
Abstract Melamine-urea-formaldehyde (MUF) resin is commonly used in the production of wood-based panels. It can replace urea-formaldehyde (UF) resin particularly to improve wood panel properties under high humidity conditions. This paper presents a life cycle assessment (LCA) study of the production of MUF resin through a case study conducted in ...
Diogo Aparecido Lopes Silva +2 more
exaly +2 more sources
Abstract Melamine-urea-formaldehyde (MUF) resin is commonly used in the production of wood-based panels. It can replace urea-formaldehyde (UF) resin particularly to improve wood panel properties under high humidity conditions. This paper presents a life cycle assessment (LCA) study of the production of MUF resin through a case study conducted in ...
Diogo Aparecido Lopes Silva +2 more
exaly +2 more sources