Results 71 to 80 of about 1,483,235 (290)
Micro-hardness measurement of photopolymer in stereolithography.
Journal of Photopolymer Science and Technology, 1997 The curing of liquid photopolymer is determined by the exposure (optical energy) deposited. In laser stereolithography, laser exposure is considered as non-homogenous within the radiation area. In order to investigate the difference of the cure degree within the cross section of a single cured strand, a micro-structure was evaluated by hardness ...
XU, Yi, IMAMURA, Masato, NAKAGAWA, Takeo
openaire +2 more sources
, 2022 The pipeline industry has undertaken an essential upgrade of well established X70 pipeline steel in heavy gauge pipes to fill the demand of increased operating pressures.
Ren, T. +6 more
core +1 more source
Rapidly Solidified High‐Strength Invar 36 Prepared by Planar‐Flow Melt Spinning
Advanced Engineering Materials, EarlyView.The Invar 36 alloy was rapidly solidified using the planar‐flow melt‐spinning technique. Ribbon samples with thicknesses ranging from 20 to 160 mm were produced. As the grain size of the ribbon decreased to sub‐micron levels, the hardness increased by more than 2 times.
Bekir Akgül, Mehmet Kul
wiley +1 more source
THE AUTOMATIC TESTERS IN MICROHARDNESS MEASUREMENT AND ISE EFFECT
Acta Metallurgica Slovaca, 2016 The measurement of micro-hardness with the applied loads 0.09807 N, 0.24518 N, 0.49035 N and 0.9807 N has been carried out by three automatic and one manually-operated micro-hardness testers.
Jozef Petrík +4 more
doaj +1 more source
A Novel Approach to Estimate the Transition Temperature via Dynamic Nanoindentation
Advanced Engineering Materials, EarlyView.A new dynamic nanoindentation‐based method was developed that uses the stiffness ratio as an indicator of the elastic–plastic deformation contributions at different temperatures. The approach successfully identified transition temperatures in ferritic steel and distinguished them from continuously ductile austenitic steel.
Stefan Zeiler +4 more
wiley +1 more source
Journal of Baghdad College of Dentistry, 2014 Background: Alterations in the microhardness and roughness are commonly used to analyze the possible negative effects of bleaching products on restorative materials.
Noor S Nadhum, Ali H Al-Khafaji
doaj
Advanced Engineering Materials, EarlyView.This perspective reframes additive manufacturing for electrical machines as a qualification‐limited materials and architecture design problem. It links process–structure–property–performance relationships to magnetic, conducting, dielectric, and thermal property windows, highlighting where AM can enable segmented magnetic circuits, permanent magnet ...
Dénes Fodor, Loránd Szabó
wiley +1 more source
Dental Journal, 2014 Background: Studies showed that bleaching agent had demineralization effect to enamel, and encourage use of remineralization paste after bleaching treatment especially in young permanent tooth which in post-eruptive enamel maturation.
Budianto Liwang +2 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.Cu and combined Cu–P microalloying refine the microstructure and enhance the nanoindentation‐derived fracture resistance of CoNiAlSi ferromagnetic shape memory alloys without suppressing the martensitic transformation. Comparative SEM, DSC, and nanoindentation results reveal that the CuP‐containing alloy provides the most balanced response, achieving ...
Mehmet Demir
wiley +1 more source
Advanced Engineering Materials, EarlyView.Near‐surface deuterium enrichment profiles for different microstructural types of TiAl after exposure at 700 °C in a heavy water‐containing environment. The deuterium levels are significantly higher than expected from natural occurrence, indicating that the heavy water dissociated during the exposure treatment and entered the specimens.
Jonathan D. H. Paul +5 more
wiley +1 more source