Results 21 to 30 of about 10,559 (261)
Influence of tool steel alloying elements Mo and Ni on the formation of the interaction layer between tool steels and molten aluminium alloys [PDF]
Journal of Mining and Metallurgy. Section B: MetallurgyThe alloying elements present in both tool steel and aluminium are influenced in the dissolution of tool steels in molten aluminum alloys. This study aims to predict how the alloying elements in the tool steel, particularly nickel (Ni) and molybdenum (Mo)
Vončina M. +3 more
doaj +1 more source
Metals, 2021 Electric arc furnace (EAF) steel bottom-blowing can effectively improve the temperature and composition uniformity of the molten pool during smelting process.
Hang Hu +6 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.Predicting extreme defects in additive manufacturing remains a key challenge limiting its structural reliability. This study proposes a statistical framework that integrates Extreme Value Theory with advanced process indicators to explore defect–process relationships and improve the estimation of critical defect sizes. The approach provides a basis for
Muhammad Muteeb Butt +8 more
wiley +1 more source
What Do Large Language Models Know About Materials?
Advanced Engineering Materials, EarlyView.If large language models (LLMs) are to be used inside the material discovery and engineering process, they must be benchmarked for the accurateness of intrinsic material knowledge. The current work introduces 1) a reasoning process through the processing–structure–property–performance chain and 2) a tool for benchmarking knowledge of LLMs concerning ...
Adrian Ehrenhofer +2 more
wiley +1 more source
Teshugang, 2005 The phenomena of oxygen contamination from crucible materials on molten steel during vacuum melting has been studied by a 50 kg vacuum induction furnace with magnesia crucible and a 25 kg vacuum induction furnace with calcia crucible to reseach the basic
薛正良 +4 more
doaj
Advanced Engineering Materials, EarlyView.The corrosion performance of AlSi7Mg and AlSi10Mg alloys produced through selective laser melting (SLM) was examined under compressive stress in a chloride environment. Electrochemical analyses, including open‐circuit potential (OCP), potentiodynamic polarization (CPP), and electrochemical impedance spectroscopy (EIS), were complemented by scanning ...
Femi John Akinfolarin +2 more
wiley +1 more source
Journal of Materials Research and TechnologyThe formation of cracks and the breakout of high-Mn steel for ultra-low temperature applications during continuous casting processes negatively affect slab quality.
Yin Cui +4 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.This study explored how effective nickel aluminide coatings are obtained in providing oxidation resistance applied to the Inconel 738 alloy, modeling with diffusion models. In the present study, kinetics and thermal behavior of the Inconel 738 alloy were studied by the low‐temperature thermoreactive aluminizing process, which was carried out at 625°C ...
Gozde Celebi Efe +4 more
wiley +1 more source
Simulation of Temperature Control of Molten Steel in RH-MFB Secondary Refining Process
Teshugang, 2006 The heat transfer behavior and temperature variation rule of molten steel during RH-MFB secondary refining process was analyzed and a model for forecasting temperature of molten steel has been established to simulate the actual process by a programmed ...
韩传基 +4 more
doaj
Utilization of Steel Slag as a Soil Amendment and Mineral Fertilizer in Agriculture: A Review
Journal of Agricultural Sciences, 2023 The gradual increase in industrial wastes allowed the utilization of these wastes in different areas. Steel slag, one of the industrial wastes, is formed during the reduction of molten crude iron to molten crude steel in basic oxygen furnaces or scrap to
Taşkın Öztaş, Gülşen Tozsin
doaj +1 more source