Results 101 to 110 of about 7,180 (207)
This article presents the results of the mechanical characterization of the impact resistance of PETG and PA6 thermoplastic polymers. This type of polymer is being widely used in industrial applications and the characterization of its mechanical ...
Coba Salcedo, Milton Fabian +5 more
core +1 more source
This paper investigates the impact of infill structure shape and density on the mechanical properties of Fused Deposition Modelling (FDM) 3D-printed materials, specifically PETG and PETG reinforced with carbon fibers (PETG+CF). The research aims to optimize additive manufacturing processes by examining how different infill geometries—hexagonal ...
Emine Hozdić, Elvis Hozdić
openaire +1 more source
Ρεολογική συμπεριφορά 3D εκτυπωμένου PETg και νανοσύνθετων υλικών PETg
This thesis focuses on the investigation of the rheological behavior of Polyethylene Terephthalate glycol (PETg) and PETg filled with carbon fillers for the purpose of extrusion based 3d-printing applications.
Οικονόμου, Αικατερίνη
core
This study examines the effect of different infill patterns and percentages on the compressive strength attributes of carbon fiber-reinforced PETG samples printed using fused deposition modeling, employing response surface methodology.
Shashwath Patil +3 more
doaj +1 more source
Glycol modified polyethylene terephthalate (PETG) is a clear, tough, thermoplastic material suitable for ethylene oxide and gamma ray sterilization and is an excellent heat-seal substrate.
Murphy, W. Raymond +3 more
core +1 more source
4D printing and annealing of PETG composites reinforced with short carbon fibers
In this study, for the first time, post-heat treatment was applied to improve the stress recovery of short carbon fiber reinforced PETG (SCFRPETG). PETG and SCFRPETG composite were printed under optimal conditions, and constrained and free shape memory ...
Rahmatabadi, Davood +9 more
core +1 more source
In this study, poly (ethylene terephthalate) (PETG) was combined with Antimony-doped Tin Oxide (ATO) to create five different composites (2.0–10.0 wt.% ATO).
Markos Petousis +9 more
doaj +1 more source
The aim of the work is to study the influence of the 3-D printing process with the Hercules Original printer by sequentially applying polymer layers using the FDM (Fused Deposition Modeling) method on the microstructural and hydrophilic properties of ...
Alexander S. Lenshin +3 more
doaj +1 more source
Polyethylene terephthalate glycol (PETG) is a novel amorphous shape memory polymer with excellent printability for 4D printing. In this article, ethylene‐vinyl acetate (EVA) is used as a biocompatible and non‐toxic copolymer to improve plasticity and ...
Saeed J. A. Ali +3 more
doaj +1 more source
Escalating plastic waste and the limited property retention of mechanically recycled polymers motivate the development of bio-based reinforcements that enable higher-value reuse. This thesis targets reinforcing recycled polyethylene terephthalate glycol (
Ren, Xinle
core

