Results 61 to 70 of about 3,247,114 (269)
Centrifuge modeling of jacked pile in clay
Notable contributions to our improved understanding of jacked pile behavior in sand have been achieved through instrumented model pile tests in laboratory test chambers, at elevated g-levels in the centrifuge, and in the field.
LI Yu-nong +2 more
doaj +1 more source
The behaviour of laterally loaded two-pile groups [PDF]
The response of piles and two-pile groups to lateral loading has been studied by field tests and computationally. Due to the lack of field test data and because of uncertainty concerning the pile/soil system it has been suggested that further ...
Arta, M.R., Arta, Mahmood Reza
core
Optoelectronic synaptic devices based on solution‐processed molecular telluride GST‐225 phase‐change inks are demonstrated for three‐factor learning. A global optical signal broadcast through a silicon waveguide induces non‐volatile conductance updates exclusively in locally electrically flagged memristors.
Kevin Portner +14 more
wiley +1 more source
Fully additive vertical organic electrochemical transistors (vOECTs) with channel‐length of 226 nm on a 50 µm compostable substrate achieve >106 current modulation and ∼36 mS transconductance. Ion‐selective integration enables 1.1 mA dec−1 sensitivity and 36 µm detection limit, highlighting a scalable platform for sustainable electronics and ...
Giulia Frusconi +3 more
wiley +1 more source
Ferroelectric tunnel junction devices based on epitaxial undoped ferroelectric HfO2 films demonstrate stable switching endurance of over 106 switching cycles, low write voltages of ±3 V, 16 measured resistance states, and neuromorphic capability.
Markus Hellenbrand +13 more
wiley +1 more source
Impact of pile roughness on shaft resistance in sand
The impact of pile roughness on shaft resistance was studied using centrifuge modelling. Two types of piles with different roughness were jacked in flight at 100g in dense and medium dense Fontainebleau NE34 sands.
Thorel, Luc +2 more
core +1 more source
In Guiyang, the tip of socketed pile is often placed on a complete or relativelycomplete rock foundation, and the bearing capacity of socketed pile is often calculated as end-bearing pile.
CAI Hang +5 more
doaj
Piles for offshore wind turbines: A state of the art review [PDF]
The paper considers the current state of the art for estimating the pull-out capacity of driven open-ended piles used to support wind turbine foundations founded on sand.
Igoe, David +2 more
core +1 more source
Structure‐Guided Dynamical Mechanics in Bioinspired Double Twisted Laminated Thin Films
This work explores a dynamic mechanistic study of crack propagation and puncture testing via real‐time monitoring of crack initiation, propagation, and termination through nature‐inspired single and double twisted architectures fabricated from cellulose nanocrystals.
Justin Brackenridge +4 more
wiley +1 more source
Electrospun Wood‐Derived Biopolymers as Electrodes in Electrochemical Energy Storage Technologies
Electrospinning transforms wood‐derived cellulose and lignin into architecturally defined, binder‐free carbon electrodes with tuneable porosity and functionality. This review shows how fibre design enables decoupled charge and mass transport, enhancing performance across battery systems, while identifying key challenges in spinnability, scalability ...
Michael W. Thielke +3 more
wiley +1 more source

