Results 221 to 230 of about 21,119 (240)
Some of the next articles are maybe not open access.
Related searches:
Related searches:
2017 14th International Bhurban Conference on Applied Sciences and Technology (IBCAST), 2017
Plasma spray physical vapor deposition (PS-PVD) is a promising technique used to manufacture strain tolerant and non-line-of-sight thermal barrier coatings (TBC). It bridges the gap between conventional plasma spraying and electron beam physical vapor deposition (EB-PVD).
Aleem Anwaar, Lianglinag Wei, Hongbo Guo
openaire +1 more source
Plasma spray physical vapor deposition (PS-PVD) is a promising technique used to manufacture strain tolerant and non-line-of-sight thermal barrier coatings (TBC). It bridges the gap between conventional plasma spraying and electron beam physical vapor deposition (EB-PVD).
Aleem Anwaar, Lianglinag Wei, Hongbo Guo
openaire +1 more source
Journal of Solid Mechanics and Materials Engineering, 2010 Porous and feather-like yttria-stabilized zirconia coatings have been deposited by plasma spray physical vapor deposition (PS-PVD) at the deposition rate of around 200 µm/min. The porosity of the coating reached > 50% and the overall thermal conductivity was reduced less than 0.5 W/mK, both of which were fundamentally independent of the coating ...
Makoto KAMBARA +4 more
exaly +3 more sources
Ceramics International, 2018
Abstract The nanostructured 8 wt% yttria stabilized zirconia (n-8YSZ) feedstocks used for plasma spraying-physical vapor deposition (PS-PVD) were successfully prepared by the powder reconstitution method for the first time in this study. The n-8YSZ feedstocks were characterized by TEM, SEM and XRD.
Feifei Zhou +5 more
openaire +1 more source
Abstract The nanostructured 8 wt% yttria stabilized zirconia (n-8YSZ) feedstocks used for plasma spraying-physical vapor deposition (PS-PVD) were successfully prepared by the powder reconstitution method for the first time in this study. The n-8YSZ feedstocks were characterized by TEM, SEM and XRD.
Feifei Zhou +5 more
openaire +1 more source
Plasma Chemistry and Plasma Processing, 2018
The plasma spray-physical vapor deposition technique (PS-PVD) is used to deposit various types of ceramic coatings. Due to the low operating pressure and high enthalpy transfer to the feedstock, deposition from the vapor phase is very effective. The particular process conditions allow for the deposition of columnar microstructures when applying thermal
Stefan Rezanka +5 more
openaire +1 more source
The plasma spray-physical vapor deposition technique (PS-PVD) is used to deposit various types of ceramic coatings. Due to the low operating pressure and high enthalpy transfer to the feedstock, deposition from the vapor phase is very effective. The particular process conditions allow for the deposition of columnar microstructures when applying thermal
Stefan Rezanka +5 more
openaire +1 more source
Journal of Engineering Materials and Technology, 2017
The multicomponent NiCoCrAlTaY coating as bond layer as well as the zirconia stabilized by yttrium oxide (YSZ) coating as top ceramic layer was deposited on duplex vane surface by plasma spray-physical vapor deposition (PS-PVD) system. The thickness and microstructure of thermal barrier coatings (TBCs) under the influence of duplex vane geometry were ...
J. Mao +5 more
openaire +1 more source
The multicomponent NiCoCrAlTaY coating as bond layer as well as the zirconia stabilized by yttrium oxide (YSZ) coating as top ceramic layer was deposited on duplex vane surface by plasma spray-physical vapor deposition (PS-PVD) system. The thickness and microstructure of thermal barrier coatings (TBCs) under the influence of duplex vane geometry were ...
J. Mao +5 more
openaire +1 more source
International Thermal Spray Conference
Abstract The commonly used method for preparing EBCs is atmospheric plasma spraying (APS), but it has problems such as easy oxidation of the coating, low spraying power, and low substrate temperature, resulting in the coating having multiple pores, cracks, and insufficient density.
Xiaofeng Zhang +4 more
openaire +1 more source
Abstract The commonly used method for preparing EBCs is atmospheric plasma spraying (APS), but it has problems such as easy oxidation of the coating, low spraying power, and low substrate temperature, resulting in the coating having multiple pores, cracks, and insufficient density.
Xiaofeng Zhang +4 more
openaire +1 more source
Computational Fluid Dynamic Analysis of Plasma Spray Physical Vapor Deposition
Proceedings of CHT-17 ICHMT International Symposium on Advances in Computational Heat Transfer May 28-June 1, 2017, Napoli, Italy, 2017Panpan Wang +4 more
openaire +1 more source
Development of plasma spray-physical vapor deposition for advanced thermal barrier coatings
2023Wenting He, Georg Mauer, Liangliang Wei
openaire +1 more source
Plasma spray–physical vapor deposition toward advanced thermal barrier coatings: a review
Rare Metals, 2020Sen-Hui Liu, Gao Zhang, Guang-Rong Li
exaly