Results 141 to 150 of about 518 (167)
Some of the next articles are maybe not open access.
Acta Mechanica, 2011
zbMATH Open Web Interface contents unavailable due to conflicting licenses.
Hoh, H. J., Xiao, Z. M., Luo, J.
openaire +1 more source
zbMATH Open Web Interface contents unavailable due to conflicting licenses.
Hoh, H. J., Xiao, Z. M., Luo, J.
openaire +1 more source
Engineering Fracture Mechanics, 2000
A method is proposed for accurately estimating the Crack Tip Opening Displacement (CTOD) at physical cracking initiation in ductile materials. The method requires a few precracked specimens to be loaded in such a way as to exhibit various crack extensions.
T Pardoen, F Delannay
openaire +1 more source
A method is proposed for accurately estimating the Crack Tip Opening Displacement (CTOD) at physical cracking initiation in ductile materials. The method requires a few precracked specimens to be loaded in such a way as to exhibit various crack extensions.
T Pardoen, F Delannay
openaire +1 more source
Elastic-plastic fracture toughness of PC/ABS blend based on CTOD and J-integral methods
Polymer, 1996Abstract The elastic-plastic fracture toughness of a PC/ABS blend has been investigated simultaneously by the conventional J-integral and the crack tip opening displacement (CTOD) methods for specimen thickness varying from 4 to 15 mm. The critical J (Jc) and the critical CTOD (δc) are based on crack initiation.
Ming-Luen Lu +2 more
openaire +1 more source
1990
A difficulty associated with predicting structural integrity is that the surface cracks found in structural components are three-dimensional whereas the crack-tip opening displacement (CTOD) and J-integral analytical techniques were derived from two-dimensional theory.
WG Reuter, WR Lloyd
exaly +2 more sources
A difficulty associated with predicting structural integrity is that the surface cracks found in structural components are three-dimensional whereas the crack-tip opening displacement (CTOD) and J-integral analytical techniques were derived from two-dimensional theory.
WG Reuter, WR Lloyd
exaly +2 more sources
Specimen Thickness Effects for Elastic-Plastic CTOD Toughness of an A36 Steel
1988This paper describes the results of an experimental and analytical study of the effect of specimen size on the fracture toughness behavior of A36 steel, primarily in the lower-transition region. This region is beyond the limits of plane strain as defined by ASTM Method E 399, but in the region where failure occurs prior to any macroscopic fibrous ...
GW Wellman, WA Sorem, RH Dodds, ST Rolfe
openaire +1 more source
Ocean Engineering, 2014
The extreme loading conditions, i.e. the large plastic bending combined with high internal pressure, and the potential cracks or flaws in the welds pose tremendous challenges to the structural integrity for offshore pipelines. In this paper, the fracture response of offshore pipeline with semi-elliptical surface crack under large plastic deformation is
Y.M. Zhang +3 more
openaire +1 more source
The extreme loading conditions, i.e. the large plastic bending combined with high internal pressure, and the potential cracks or flaws in the welds pose tremendous challenges to the structural integrity for offshore pipelines. In this paper, the fracture response of offshore pipeline with semi-elliptical surface crack under large plastic deformation is
Y.M. Zhang +3 more
openaire +1 more source
Journal of Pressure Vessel Technology, 2020
Abstract Engineering solutions for crack-tip opening displacement (CTOD) and J-integral estimations for pipelines with a surface crack are proposed based on parametric finite element (FE) analyses for various geometries, material properties, and internal pressure conditions.
Youn-Young Jang +4 more
openaire +1 more source
Abstract Engineering solutions for crack-tip opening displacement (CTOD) and J-integral estimations for pipelines with a surface crack are proposed based on parametric finite element (FE) analyses for various geometries, material properties, and internal pressure conditions.
Youn-Young Jang +4 more
openaire +1 more source
A Comparison of J and CTOD as Elastic-Plastic Fracture Characterizing Parameters
1995This paper presents results of experimental and numerical analysis studies to investigate the relationship between J and CTOD and assess whether they are, indeed, both suitable elastic-plastic fracture characterizing parameters. Detailed elastic-plastic finite element analyses were undertaken for SE(B) specimens with a/W ratios of 0.1, 0.2, 0.3 and 0.5.
JR Gordon, BK Neale, Y-Y Wang
openaire +1 more source
Volume 7: Structures and Dynamics, Parts A and B, 2012
Very often in the open literature the crack propagation simulation is based on the linear elastic fracture mechanics. This article describes a novel application of the cyclic crack tip opening displacement (ΔCTOD) method for evaluation of the cyclic nonlinear energy release rate under large plasticity and cyclic loading conditions. In order to consider
Piotr Bednarz +2 more
openaire +1 more source
Very often in the open literature the crack propagation simulation is based on the linear elastic fracture mechanics. This article describes a novel application of the cyclic crack tip opening displacement (ΔCTOD) method for evaluation of the cyclic nonlinear energy release rate under large plasticity and cyclic loading conditions. In order to consider
Piotr Bednarz +2 more
openaire +1 more source
Plastic collapse loads Pc and CTODs of a cracked Circular Hollow Section (CHS) T-joint
2012The FailureAssessment Diagram (FAD) is an accepted approach in assessing the structural safety and integrity of any cracked tubular joint. In order to extend its application to a more complex geometry of any cracked Circular Hollow Section (CHS) tubular T-joint, there are three major challenges needed to be overcome; firstly there is a need to validate
Li, T., Lie, S. T., Shao, Y. B.
openaire +2 more sources