Results 31 to 40 of about 1,161 (209)
Advances in Mechanical Engineering, 2020 Micro-textured cutting tools were widely reported due to the improved cutting performance, for example, the reduction of cutting forces. However, the cutting performance is significantly dependent on the parameters of the micro-textures.
Haidong Yang +8 more
doaj +1 more source
Journal of Advanced Ceramics, 2022 Cubic boron nitride (cBN) with high hardness, thermal conductivity, wear resistance, and chemical inertness has become the most promising abrasive and machining material.
Shuna Chen +8 more
doaj +1 more source
Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625
Scientific Reports, 2023 Orbital friction stir welding (FSW) has been applied to clad pipes, which is certainly of interest to the oil and gas industry. In this context, an FSW system capable of performing sound joints in one pass with full tool penetration was developed ...
C. V. Amavisca +7 more
doaj +1 more source
Технічна інженерія, 2022 So far, the development of modern tribology in the mechanical assembly industry requires the search for new tool materials, consideration of technological capabilities of cutting tools and determine the optimal characteristics and process conditions with
Ya.P. , P.P. , V.A.
doaj +1 more source
Tool-life and wear mechanisms of CBN tools in machining of Inconel 718 [PDF]
, 2007 The demand for increasing productivity when machining heat resistant alloys has resulted in the use of new tool materials such as cubic boron nitride (CBN) or ceramics.
DESSOLY, Michel +4 more
core +1 more source
The practice of using a cutting tool with PCNB group BL in the processing of hardened steels
Технічна інженерія, 2021 The industry is increasingly using the technological capabilities of metalworking using tools made of superhard materials, in particular polycrystalline cubic boron nitride (PCВN) group BL.
Ya.P. , P.P.
doaj +1 more source
, 2022 S.1147-1157The abrasive machining of superhard cutting tool materials such as polycrystalline cubic boron nitride is often conducted by grinding using diamond grinding wheels.
Kaiser, Josef +3 more
core +1 more source
Journal of Advanced Ceramics, 2022 The high strength and toughness of natural materials are mainly determined by a combination of mechanisms operating at different length scales, which can be used as a strategy to reduce the intrinsic brittleness of ceramics. Inspired by the architectures
Shu-na Chen +6 more
doaj +1 more source
Hard machining of agricultural machines parts
Research in Agricultural Engineering, 2013 For the renovation and/or improvement of the surface properties of machine elements, hard facing is often used. Hard structures obtained in layers or by heat treatment achieve a hardness of up to 68 hardness (HRC) or even more.
R. Drlička +4 more
doaj +1 more source
Effects of rotational speed on the Al0.3CoCrCu0.3FeNi high-entropy alloy by friction stir welding
High Temperature Materials and Processes, 2020 Welding and relevant studies are indispensable to employ high-entropy alloys for practical applications. In this study, Al0.3CoCrCu0.3FeNi high-entropy alloy with single FCC phase was used to make “bead-on-plate” friction stir welds at different ...
Lin Po-Ting +4 more
doaj +1 more source