Results 1 to 10 of about 203,842 (307)
Carbon in Commercially Pure Titanium. [PDF]
Materials (Basel), 2023 In a way so far unmatched in any single study, this paper presents the complex characteristics of commercially pure titanium (CP-Ti) containing 0.2 wt.% carbon, which is significantly above the carbon level in commonly used titanium alloys, while at the same time being the maximum permitted content in light of the recommendations in force.
Szkliniarz A, Szkliniarz W.
europepmc +3 more sources
The potential influence of high uric acid exposure on surface and corrosion susceptibility of pure titanium [PDF]
Journal of Materials Science: Materials in Medicine, 2022 This study investigated the corrosion susceptibility of pure titanium under uric acid exposure for 7 days based on surface analysis. The prepared pure titanium specimens, exposed to different concentrations of uric acid, were examined for surface ...
Yao Liu +4 more
doaj +2 more sources
Effects of Electrical Parameters on Micro-Arc Oxidation Coatings on Pure Titanium [PDF]
Micromachines, 2023 The micro-arc oxidation process was used to apply a ceramic oxide coating on a pure titanium substrate using calcium acetate and sodium dihydrogen phosphate as an electrolyte.
Aqeel Abbas +2 more
doaj +2 more sources
Clinical Efficacy of Three-Dimensional-Printed Pure Titanium Fracture Plates with Locking Screw Systems in Distal Tibia Fractures [PDF]
MedicinaBackground and Objectives: Distal tibia fractures are high-energy injuries characterized by a mismatch between standard plate designs and the patient’s specific anatomical bone structure, which can lead to severe soft tissue damage.
Ji Hye Choi +3 more
doaj +2 more sources
Properties of pure titanium and ultra fine grained titanium
Metalurgija, 2011 The properties of ultra fine grained nano Titanium made by ECAP technology and pure cold drawn Titanium are analyzed in this contribution. Mechanical properties, resistance to wear by a ZrO2 ball friction test, corrosion in a Hank solution by the Tafel’s
I. Bernáthová, M. Buršák
doaj +1 more source
Fenmo yejin jishu, 2022 Pure titanium rods were prepared by the powder metallurgy technology combined with the hot extrusion and the rotary swaging. The yield strength, Vickers hardness, microstructure, and relative density of the pure titanium rods were tested by the universal
LIU Xiao-min +8 more
doaj +1 more source
Galling-Free Fine Blanking of Titanium Plates Using Carbon-Supersaturated High-Speed Steel Punch
C, 2023 A carbon-supersaturated (CS-) high-speed steel punch was prepared using low-temperature plasma carburizing for fine blanking of pure titanium plates. The bare high-speed steel punch was also prepared as a reference to describe the adhesion and abrasive ...
Tatsuhiko Aizawa, Kenji Fuchiwaki
doaj +1 more source
Tribocorrosion behavior of Nb coating deposited by double-glow plasma alloying
Materials Research Express, 2021 Titanium and titanium alloys are considered as good implant materials, but their poor tribocorrosion resistance limits further development. In this study, niobium coating (DG-Nb) was deposited on TA3 pure titanium (Pure Ti) by double-glow plasma alloying
Xinbin Zhu +5 more
doaj +1 more source
Size effect on the high strain rate micro/meso-tensile behaviors of pure titanium foil
Journal of Materials Research and Technology, 2021 The influence of size effect on deformation behaviors at quasi-static strain rate has been widely studied in recent years. However, there is little research about size effect on deformation behaviors of metal foils at high strain rate. To clarify how the
Chengxi Zhu +4 more
doaj +1 more source
Nihon Kikai Gakkai ronbunshu, 2020 Pure titanium thin wires have been used for medical fields. It is important to investigate the possibility of non-destructive inspection of pure titanium thin wires for the safety utilization of them.
Junji SAKAMOTO +3 more
doaj +1 more source