Results 91 to 100 of about 1,466,139 (305)
Creep‐Induced Microstructural Evolution in an A2‐B2 Superalloy
Advanced Engineering Materials, EarlyView.A 27.3Ta‐27.3Mo‐27.3Ti‐8Cr‐10Al (at.%) refractory high‐entropy alloy with precipitation‐strengthened A2‐B2 microstructure was studied by creep tests at 1030°C, which demonstrate a transition in deformation mechanisms in the range of 100–150 MPa applied stress. This is associated with changes in dislocation–precipitate interactions. Relevant deformation
Liu Yang +10 more
wiley +1 more source
Enhanced Strength and Corrosion Resistance of Ti‐13Nb‐12Ta‐10Zr‐4Sn Alloy by Aging Treatment
Advanced Engineering Materials, EarlyView.This work systematically investigates the effect of aging treatment on mechanical properties and corrosion behavior of vacuum arc‐melted Ti‐13Nb‐12Ta‐10Zr‐4Sn alloy. Owing to the increased α″ martensite, strength and corrosion resistance were significantly enhanced by aging treatment.
Yuhua Li +5 more
wiley +1 more source
From Meteorite to Meteor-Wrong: Investigating a controversial specimen from Cuba
Revista Mexicana de Ciencias GeológicasThe meteorite “Cuba”, whose type of mass is catalogued as MNCN No. 17294 (Museum of Natural Sciences, Madrid, Spain), has long been considered an official meteorite, included in the Meteoritical Society’s online database.
Yasmani Ceballos-Izquierdo +2 more
doaj +1 more source
In Situ Micromechanical Study of Bimodal γ′–γ″ Precipitate Assemblies in Ni–Cr–Al–Nb Superalloy
Advanced Engineering Materials, EarlyView.A Ni–Cr–Al–Nb superalloy with a bimodal γ′–γ″ precipitate distribution is developed. Composite precipitate assemblies form through heterogeneous nucleation, effectively impeding dislocation motion. Micropillar compression reveals high strength at room and elevated temperatures, governed by precipitate shearing, with coupled faulting mechanisms ...
Ujjval Bansal +4 more
wiley +1 more source
SEM-EDS results of EAFD pellet reaction at 1773 K for 240 s
The SEM-EDS results for the pellet that is from EAFD that is from EAFD reaction for 240 s.
Chao Yang (17701005)
core +1 more source
Representative SEM images and EDS elemental analysis of modified electrode.
, 2015 SEM images of CESM-GCE (A) and AuNPs-CESM-GCE (B), (C). EDS elemental analysis (D) and scanning images (E) of AuNPs-CESM-GCE; EDS element scanning image with all elements (a) and elemental distribution of C (b), Cl (c), Au (d) and O (e).
Zhuangjun Fan (754175) +8 more
core +1 more source
Advanced Engineering Materials, EarlyView.Scandium (Sc)‐doped AlCoCrFeMo HEA coatings are fabricated via flame spraying with 0.1, 0.3, and 0.5 wt% Sc additions. Among these, the HEA‐Sc0.3 coating exhibits the highest corrosion resistance, indicated by a more positive corrosion potential and lower current density.
Pankaj Kumar +7 more
wiley +1 more source
SEM-EDS images of pellets at 1723 K reaction time of 960 s
The SEM-EDS results for the pellet that is from CaO-SiO2-Al2O3-MgO pellet reaction for 960 s.
Chao Yang (17701005)
core +1 more source
Cathodic Cage Plasma Deposition of Nanostructured Cu–Fe–Se Coatings on Poly(methyl Methacrylate)
Advanced Engineering Materials, EarlyView.Nanostructured Cu–Fe–Se coatings are deposited on PMMA by a modified cathodic cage plasma process, enabling low‐temperature deposition on polymer substrates. A transition from discontinuous to compact morphology is observed with temperature, with optimal properties at 200°C, where improved CuFeSe2‐type bonding, lowest sheet resistance, and favorable ...
V. S. S. Sobrinho +8 more
wiley +1 more source
SEM/EDS analysis of aluminosilicate additives
[ENG:]The dataset contains research results generated as part of the project titled " The influence of aluminosilicate additives on high-temperature corrosion and ash properties of animal-origin biomass", funded by the National Science Centre ...
Maj, Izabella +2 more
core +1 more source