Results 181 to 190 of about 141,520 (208)
Some of the next articles are maybe not open access.
Temperature–Pressure‐Sintering (TPS) diagram approach for sintering of silicon
Materials Letters, 2012Abstract Temperature–(water vapor) Pressure‐Sintering (TPS) diagrams were established to control the microstructure evolution and densification during sintering of silicon. Experiments were performed under controlled humidified atmospheres and corroborated diagram predictions.
Lebrun, J.M. +2 more
openaire +2 more sources
Low-temperature sintering of ZrW2O8–SiO2 by spark plasma sintering
Journal of Materials Science, 2009Amorphous ZrW2O8 powder and amorphous SiO2 powder were prepared by a sol–gel process as raw materials, and high-density ZrW2O8–SiO2 were successfully prepared at a much lower temperature of 923 K for a much shorter holding time of 10 min by spark plasma sintering (SPS) method rather than by conventional melt-quenching method.
Kenji Kanamori +4 more
openaire +1 more source
Low Temperature Sintering of YIG Using Microwave Sintering Method
Integrated Ferroelectrics, 2010The pure YIG samples were prepared using microwave sintering method. The samples were sintered by using two types of sintering methods conventional and microwave. The sintered samples were characterized using XRD and SEM. The microwave sintering method was observed to be superior to conventional sintering process in the densification of pure YIG ...
T. Ramesh, S. R. Murthy, R. S. Shinde
openaire +1 more source
Low Temperature Sintering of Innovative Bioactive Glasses
Journal of the American Ceramic Society, 2012Two innovative glass compositions based on the commonly used 45 S 5 B ioglass ® were developed by increasing the calcium quantity and replacing the sodium oxide with a specific content of potassium oxide.
BELLUCCI, Devis +2 more
openaire +2 more sources
The Effect of Sintering Temperature in Bi1.7Pb0.2Sb0.1Sr2Ca2Cu3O y Superconductors
Journal of Superconductivity and Novel Magnetism, 2009In this study, the effects of sintering temperature on the Bi-2223 phase formation and the influence of minor phases on the intergranular properties of Sb substituted Bi-2223 samples were investigated. The samples were prepared by solid-state reaction method with different sintering temperatures ranging from 800 to 855 °C.
KOCABAŞ, KEMAL +2 more
openaire +2 more sources
Effect of Adding Calcium Ferrites to the Sinter Mix on the Sintering Temperature and Sinter Quality
AISTech 2022 Proceedings of the Iron and Steel Technology Conference, 2022S. Cho, S. Jung, S. Kim, L. Rocha
openaire +1 more source
Low-Temperature Sintering of PZT with a Sintering Aid
Key Engineering Materials, 2002Jun Tomizawa +3 more
openaire +1 more source