Results 21 to 30 of about 6,570 (308)
Slip casting and pressureless sintering of Ti3AlC2
Journal of Advanced Ceramics, 2019 Slip casting and subsequent pressureless sintering (PLS) allow the preparation of complex-shaped and large-sized Ti3AlC2 components for many potential applications.
Yimin Gong +5 more
doaj +1 more source
Journal of Materials Research and Technology, 2021 The study described here is aimed at illuminating deformation mechanism involved in Twin-roll Thin Strip Casting Process (TRSC) with respect to high-permeability 6.5 wt.% Si electrical strip (6.5 wt.% Si strip) in terms of crystal plasticity (CP) theory,
W.L. Hu +5 more
doaj +1 more source
Microstructure and mechanical properties of Al2O3-Cu-Ni hybrid composites fabricated by slip casting [PDF]
Processing and Application of Ceramics, 2020 This work focuses on developing the fabrication method of hybrid composites based on Al2O3-Cu system with the addition of nickel phase. The composites were prepared by slip casting and the slurries with a high concentration of solid content were used ...
Justyna Zygmuntowicz +5 more
doaj +1 more source
Jurnal Rekayasa Kimia & Lingkungan, 2011 This research aims to investigate the effect of dye adsorption into TiO2 layer in dye sensitized solar cell (DSSC), which the TiO2 layer is formed by slip casting and electrophoresis methods.
Ratno Nuryadi
doaj +2 more sources
3Y-TZP dip-coated with Zn-containing calcium silicate layers: development and characterization
Cerâmica, 2021 Coating layers based on Ca3Si3O9, Ca2ZnSi2O7, and ZnSiO4 on 3Y-TZP ceramics were obtained by the dip coating process, using SiO2-CaO-P2O5-ZnO glass suspensions with Zn contents in the range of 0-20 mol%. The influence of the Zn content in the dip coating
Y. L. Bruni, M. P. Albano
doaj +1 more source
Effect of shaping method on the densification of SnO2 ceramic pieces
Revista Facultad de Ingeniería Universidad de Antioquia, 2014 Tin oxide, SnO2, has a big technological importance. For its uses it is of great interest to optimize the sintering conditions to obtain an adequate densification, microstructure and mechanical properties, depending on the technological application.
Yasser Halil Ochoa-Muñoz +2 more
doaj +1 more source
On the influence of the rheological boundary conditions on the fibre orientations in the production of steel fibre reinforced concrete elements; pp. 408–413 [PDF]
Proceedings of the Estonian Academy of Sciences, 2016 In this paper the influence of the boundary conditions on the fibre orientation distribution in rheology simulations of the casting of steel fibre reinforced concrete is discussed.
Heiko Herrmann, Aarne Lees
doaj +1 more source
Journal of Asian Ceramic SocietiesIn slip casting, predicting the packing fraction of the slip-cast green body based on slurry characteristics is important. Thus, in this study, we measured the apparent viscosity and packing fractions of the sediment and filtered cake of aqueous alumina ...
Takamasa Mori +3 more
doaj +1 more source
Open CeramicsThis study investigates the fabrication and characterization of cone shaped fibre reinforced ultra-high-temperature ceramic matrix composites (UHTCMCs) based on ZrB2, using slip casting and pressure-less sintering at 2100 °C in Ar.
Matteo Mor +2 more
doaj +1 more source
Fabrication of ZrO2-Ti Composites by Slip Casting Method
Archives of Metallurgy and Materials, 2016 Slip casting is one of the most popular shaping method in ceramic technology which allows producing a large number of elements in small period of time. This shaping technique gives a possibility to fabricate ceramic or composite materials such as ZrO2-Ti.
Łada P. +4 more
doaj +1 more source