Results 11 to 20 of about 1,062 (206)
Open CeramicsNanostructured hybrid functional perovskite materials are an exciting domain of electroceramic materials and have created attention among researchers due to the coexistence of multiple properties like piezo and ferroelectricity.
Subramani Supriya
doaj +2 more sources
Electromechanical properties of sodium bismuth titanate thin films
Thin Solid Films, 2022 Lead-free piezoelectric sodium bismuth titanate (BNT) films are promising candidates for actuators applications as an alternative to lead zirconate titanate films. We focused in this work on the growth and characteristics of BNT films deposited by sputtering on silicon substrates with LaNiO3 electrodes.
Kossman, Stephania +4 more
openaire +2 more sources
Sinterability, Microstructural Evolution, and Dielectric Performance of Bismuth Sodium Titanate (Bi0.5Na0.5TiO3) Lead-Free Ferroelectric Ceramics [PDF]
Archives of Metallurgy and MaterialsIn this study, lead-free bismuth sodium titanate (BNT; Bi0.5Na0.5TiO3) powder was synthesized using wet precipitation. The sintering behavior and dielectric properties of the BNT ceramics were investigated in terms of the sintering temperature.
Islam Takiul, Sanghaw Lee, Haejin Hwang
doaj +3 more sources
Journal of Advanced Dielectrics, 2023 Lead-free piezoelectric sodium bismuth titanate (([Formula: see text][Formula: see text])TiO3, BNT) thin films were epitaxially grown onto (001)-, (110)-, and (111)-oriented Nb:SrTiO3 (STO) single crystal substrates prepared by sol–gel processing. Highly
Jinyan Zhao +5 more
doaj +2 more sources
SN Applied Sciences, 2021 Phase pure perovskite (1-x)Bi1/2Na1/2TiO3 – xBi1/2K1/2TiO3 (BNKT) thin films were successfully prepared via an inverse mixing order chemical solution deposition method and the impact of process conditions on film properties were observed.
Kyle M. Grove +5 more
doaj +1 more source
B-site substituted solid solutions on the base of sodium-bismuth titanate [PDF]
Journal of Advanced Dielectrics, 2016 The paper presents results of studies of the formation of phases during the solid-state synthesis in the [(Na0.5Bi0.5)0.80Ba0.20](Ti1–yBy)O3 system of solid solutions with B-site substitutions.
V. M. Ishchuk +5 more
doaj +1 more source
The Journal of Engineering, 2023 An evaluation of the performance of a recently developed formulation of (lead‐free) Sodium‐Bismuth titanate – Barium Titanate (NBT‐BT) piezoceramic is presented through the construction and testing of several immersion transducers based around a new ...
Thomas R. P. Kelley
doaj +1 more source
Investigation of Ga Doping for Non-stoichiometric Sodium Bismuth Titanate Ceramics [PDF]
Journal of Materials Science: Materials in Electronics, 2021 Abstract The electrical performance of Ga3+ doping Na0.5Bi0.5TiO3-based oxygen ion conductor was studied. The Na0.52Bi0.47Ti1−xGaxO3−δ (x = 0, 0.01, 0.015, 0.02) samples were fabricated by the means of traditional solid-state reaction. The results of AC impedance measurement show that the bulk conductivity of Na0.52Bi0.47Ti1−xGaxO3−δ samples ...
M. Y. Li +7 more
openaire +2 more sources
Journal of Materiomics, 2020 In the present work, the nature of phase evolution of (1−x)(Na0.5Bi0.5)TiO3-xSrTiO3 (NBT-xST) solid solutions with x of 0–0.6 is revealed by characterizing the dielectric and ferroelectric properties.
Gang Liu +5 more
doaj +1 more source
Impact of Thermal Treatment on the Surface of Na0.5Bi0.5TiO3-Based Ceramics
Crystals, 2021 Thermal etching is a widely accepted surface treatment method for studying microstructure in Na0.5Bi0.5TiO3-based compositions. Surprisingly, besides the flat pattern of grains (suitable for evaluating ceramics’ microstructure), images illustrating well ...
Liga Bikse +7 more
doaj +1 more source