Optimizing injector nozzle configuration for high efficiency and low emissions in diesel engines fueled with biodiesel and n-butanol blends. [PDF]
Sci RepKumar NS +6 more
europepmc +1 more source
Analysis of Proteins and Peptides by Electrokinetic Stacking Coupled with Paper Spray Mass Spectrometry. [PDF]
Anal ChemWedasingha L +3 more
europepmc +1 more source
Effects of graphene and CNT nanoparticle additives on combustion, performance, and emissions of a diesel engine under varying injection pressures. [PDF]
Sci RepRaj RSN +7 more
europepmc +1 more source
Related searches:
Effect of the spray cone angle in the spray cooling with R134a
Experimental Thermal and Fluid Science, 2013Spray cooling experiments were performed to study the effect of the spray cone angle on heat transfer and film thickness. The experiments were carried out for three different types of nozzles. Results for heat transfer and film thickness for different flow rates are presented working with the dielectric refrigerant R134a and on a heater with low ...
Juan Carlos Ramos +2 more
exaly +2 more sources
Abstract Numerical and experimental investigations have been made on the coefficient of discharge C d and the spray cone angle ψ of a swirl spray solid cone pressure nozzle. The theoretical predictions are made from a numerical computation of flow in the nozzle using the standard k – e model of turbulence.
S K Som, S K Dash
exaly +2 more sources
Optimal nozzle spray cone angle for triangular-pitch shell-and-tube interior spray evaporator
International Journal of Heat and Mass Transfer, 2015Abstract The present study proposed a triangular-pitch shell-and-tube spray evaporator featuring an interior spray technique. In the proposed approach, the nozzle tubes are positioned within the tube bundle in such a way that the surface of each heater tube is sprayed simultaneously by two cooling sprays.
Tong-Bou Chang
exaly +2 more sources
Effect of flow conditions on spray cone angle of a two-fluid atomizer
Journal of Mechanical Science and Technology, 2011A visual study is conducted to determine the effects of operating conditions on the spray cone angle of a two-fluid atomizer. The liquid (water) jets exit from peripheral inclined orifices and are introduced into a high-speed gas (air) stream in the gravitational direction.
Sayed Abdolhossein Banitabaei +2 more
exaly +2 more sources
Empirical correlation for spray half cone angle in plain-jet airblast atomizers
Fuel, 2020 Abstract Plain-jet airblast atomizers are widely used in industrial applications. The literature contains numerous papers on Sauter mean diameter, however, there is no estimation method available for spray cone angle, SCA, which derivation is the primary goal of this study. Four distinct, practical model liquids were analyzed: distilled water, diesel
András Urbán +2 more
exaly +3 more sources
Transient Spray Cone Angles in Pressure-Swirl Injector Sprays
SAE Technical Paper Series, 2004<div class="htmlview paragraph">The transient cone angle of pressure swirl sprays from injectors intended for use in gasoline direct injection engines was measured from 2D Mie scattering images. A variety of injectors with varying nominal cone angle and flow rate were investigated.
Jordan A. Snyder +3 more
openaire +1 more source