Results 11 to 20 of about 2,375 (300)
Simulation Fluidity Test for Semisolid Squeeze Casting [PDF]
MATEC Web of Conferences, 2020 The paper deals with semi solid squeeze casting technology. Fluidity tests were designed for the selected technology. The shape of the test casting was designed in the shape of test bars with different thicknesses and also in the shape of a stepped ...
Pastirčák Richard, Martinec Denis
doaj +2 more sources
Numerical Simulation of Squeeze-Casting SiC3D/Al Ceramic Matrix Composites
MetalsIn this study, the filling and solidification processes of squeeze-casting SiC3D/Al composites were analyzed by the ProCAST simulation software (ver. 2018.0).
Yangwei Wang +6 more
doaj +2 more sources
Study on the Subcritical Quenching Process of High-Chromium Cast Iron Prepared by Squeeze Casting
, 2023 In this study, the heat treatment process of a high-chromium cast iron (HCCI) alloy prepared via 128 MPa squeeze casting at different subcritical quenching temperatures was investigated.
Biwei Zhao +5 more
core +1 more source
Development of Specially Reinforced Magnesium Composites Prepared by Squeeze Casting Process
, 2021 A wide range of opportunities in the field of automotive and structural applications are being offered by Magnesium matrix composites because of their enhanced mechanical properties.
Raheem, Al-Sabur +2 more
core +1 more source
A process for the fabrication of ceramic fibre reinforced titanium aluminide [PDF]
, 1992 This paper describes initial work on a novel process for the production of titanium aluminide matrix composites reinforced with short alumina fibers.
Cundy, S. J., Horsfall, Ian
core +1 more source
The Influence of Different Wall Thicknesses of the Casting in the Direct Squeeze Casting
Archives of Foundry Engineering, 2018 The paper deals with squeeze casting technology. For this research a direct squeeze casting method has been chosen. As an experimental material, the AlSi12 and AlSi7Mg0.3 alloys were used.
Pastirčák, R. +2 more
openaire +2 more sources
Journal of Materials Research and Technology, 2023 In this work, the influence of the processes of unidirectional solidification and squeeze casting in microstructure, thermodynamic parameters and mechanical properties of CuAlBeNbNi shape memory alloy (SMA) was investigated.
David D.S. Silva +6 more
doaj +1 more source
Materials & Design, 2023 The need for lightweight materials towards aerospace has increased prominently. This paper focuses on introducing a novel reinforcement mixture of graphene with Al 2014 powder synthesised through ball milling technique.
Ashwath Pazhani +8 more
doaj +1 more source
Squeeze casting results of aluminium alloys [PDF]
Manufacturing Technology, 2013 The paper deals with a squeeze casting process. This process added a new knowledge in to research in the branch by crystallization of aluminium alloys. Due to this purpose there was designed a special tool, which was placed on hydraulic press. The squeeze casting was carried out on an aluminium alloy (AlSi12, with 12 % silicon).
Iva Nová, Jiří Machuta
openaire +1 more source
Squeeze Casting of Al-Si Alloys
, 2012 Nowadays there is a great demand of lightweight parts with high mechanical performances; in such applications, e.g. automotive, production rate and process control are critical aspects as well. This way, pressure assisted casting processes are a good compromise between performances and costs.
BELLISARIO, DENISE +5 more
openaire +3 more sources