Results 21 to 30 of about 2,375 (300)
Metals, 2018 Semi-solid ZCuSn10P1 alloy slurry was fabricated by a novel enclosed cooling slope channel (ECSC). The influence of pouring length of ECSC on the microstructures of ZCuSn10P1 alloy semi-solid slurry was studied with an optical microscope an optical ...
Yongkun Li +4 more
doaj +1 more source
Study on heat treatment blister of squeeze casting parts [PDF]
China Foundry, 2007 Heat treatment blister is one of the common defects found in squeeze casting parts, which is related to squeeze mode, process and mold. For direct squeeze-casting parts, solution heat treatment can be performed smoothly as long as oil-based paint is not ...
QI Pi-xiang, QI Lin, TONG Wen-jun
doaj
Influence of Casting Wall Thickness on Crystallisation Under Pressure [PDF]
Archives of Metallurgy and Materials, 2018 The paper deals with squeeze casting technology. For this research a direct squeeze casting method has been chosen. The influence of process parameters variation (casting temperature, mold temperature, pressure) on mechanical properties and structure ...
R. Pastirčák +4 more
doaj +1 more source
On the Part Quality, Process Parameters and In-Die Pressures in Indirect Squeeze Casting
Technologies, 2021 Squeeze casting is a process that can produce the highest quality castings. In the current study, the effect of the process settings and the in-die conditions on rejection rates is studied through a full-scale experimental study. Factors affecting the as-
Anders E. W. Jarfors +4 more
doaj +1 more source
The Effect of Ceramic Particale Oxides addition on Wear Resistance of Composite Material for Aluminum Base Alloy [PDF]
Engineering and Technology Journal, 2012 To The aim of this research is to study the effect of 5 wt % Al2O3 addition Al- base alloy on sliding wear resistance under dry sliding conditions using pin- on- disc machine . Wear test was conducted after squeeze casting under different pressure ( 30 ,
Israa Abdulkader, Maryam Abduladhem
doaj +1 more source
Metals, 2023 The technology of casting with crystallization under pressure-squeeze casting belongs to unconventional pressure-casting methods. The melt or material in a semi-solid state is pressed under pressure until the casting solidifies completely.
Richard Pastirčák +3 more
doaj +1 more source
Journal of Materials Research and TechnologyDefects are prone to form during solidification in Al–Cu alloy squeeze castings, especially at locations with significant differences in wall thickness. This work developed a secondary loading technique during squeeze casting to solve this problem. First,
Zuowei Zhang +3 more
doaj +1 more source
Special Composite Squeeze Castings
DENKI-SEIKO[ELECTRIC FURNACE STEEL], 1972 Special composite squeeze castings are manufactured by means of a quite new process of combination of steelmaking technology with powder metallugical technology and this new process is different from the conventional method for composite materials. Both compressed deformation and sintering are simultaneously done in this new process.As this new product
Sakai, Yoshifumi, Wada, Atsushi
openaire +2 more sources
Overall Design of the Forming System for Squeeze Casting
, 2011 As a forming process, squeeze casting is completed in the corresponding manufacturing system. The paper deals with the overall design of the manufacturing system-the forming system for squeeze casting.
Ming Shao, Jian Xin Deng
core +1 more source
Journal of Materials Research and TechnologyThe medium-carbon low-alloy Cr–Mo steel liners with ultra-larger size of 768 mm × 466 mm × 140 mm were produced by squeeze casting (SC) and the traditional sand gravity casting (GC) process, and the effect of degassing treatment before squeeze casting ...
Sai Liu +5 more
doaj +1 more source