Results 21 to 30 of about 15,145 (249)
International Journal of Electrochemical Science, 2020 Orthodontic implanted wires are made of different stainless steels, to regulate the teeth. The fluorinated toothpastes used during the period of the treatment may induce a corrosive effect on these stainless steels.
Veaceslav Neaga +2 more
doaj +1 more source
Effect of Geobacter sulfurreducens on the microbial corrosion of mild steel, ferritic and austenitic stainless steels [PDF]
, 2009 The influence of Geobacter sulfurreducens was tested on the anaerobic corrosion of four different steels: mild steel 1145, ferritic steel 403 and austenitic steels 304L and 316L.
Basséguy, Régine +3 more
core +1 more source
Effect of surface treatment on powder injection molding performance of 316L stainless steel powders
Fenmo yejin jishu, 2023 The 316L stainless steel powder injection molding feedstock was prepared by melt mixing with polyethylene glycol/epoxy resin (PEG-EP) as the powder surface modifier and polyformaldehyde resin (POM) as the binder system.
CHEN Zexu +4 more
doaj +1 more source
Effect of surface preparation on the corrosion of austenitic stainless steel 304L in high temperature steam and simulated PWR primary water [PDF]
, 2012 The corrosion behavior of 304L grade stainless steel (SS) in high-temperature steam and in a simulated Pressurized Water Reactor (PWR) is studied. The goal was to characterize the nature of the oxide coating generated during 500 h exposure of samples in ...
Cissé, Sarata +4 more
core +1 more source
Metals, 2019 316L stainless steel is a promising material candidate for a hydrogen containment system. However, when in contact with hydrogen, the material could be degraded by hydrogen embrittlement (HE).
Le Thanh Hung Nguyen +5 more
doaj +1 more source
Journal of Materials Research and Technology, 2023 Boron(B)element is often utilized to enhance mechanical properties of stainless steel due to its excellent performance. In this study, selective laser melting (SLM) was used to print 316L/B stainless steel with varying boron weight content.
Qi Zheng +5 more
doaj +1 more source
Synergistic effects of micro-abrasion–corrosion of UNS S30403, S31603 and S32760 stainless steels [PDF]
, 2007 In this study, the synergistic effects of abrasion and corrosion on UNS S30403, S31603 and S32760 stainless steels have been investigated using a micro-abrasion test rig.
J.O. Bello +5 more
core +1 more source
Qanun Medika: Jurnal Kedokteran Fakultas Kedokteran Universitas Muhammadiyah Surabaya, 2019 Demands of orthopedic implants are increasing in Indonesia, but its production are limited and still imported. Stainless steel, especially 316L is one of metal that is used commonly.
Ferdiansyah Mahyudin +4 more
doaj +1 more source
ON THE PROPAGATION OF OPEN AND COVERED PIT IN 316L STAINLESS STEEL [PDF]
Electrochimica Acta, 2016 Abstract Pitting corrosion on stainless steel has been widely studied during the last decades, but since it is a stochastic process, it remains difficult to analyze experimentally such a phenomenon. In this work, reproducible single pits were performed on 316L steel by using an experimental setup based on the use of a glass microcapillary to locally ...
Heurtault, Stéphane +3 more
openaire +2 more sources
Tribo-corrosion mechanisms of stainless steel in soft drinks [PDF]
, 2010 Tribo-corrosion mechanisms of 316L Stainless Steel in slurries containing common household soft drinks have been studied through investigating the micro-abrasion-corrosion performance using a ball and disk apparatus which has been modified to measure the
Stack, Margaret +4 more
core +1 more source