Results 41 to 50 of about 15,145 (249)
Powder Optimization Strategies for Binder Jetting Printing of BaTiO3 and Ba0,6Sr0,4TiO3 Ceramics
Advanced Engineering Materials, EarlyView.Powder optimization is investigated to enable binder jetting of BaTiO3 and Ba0.6Sr0.4TiO3 ferroelectric ceramics. The antagonistic relationship between flowability and binder compatibility is addressed through binder impregnation of granulated powders and fumed silica addition to fine powders.
Fanny Pruvost +4 more
wiley +1 more source
Exploring Linear Rake Machining In 316L Austenitic Stainless Steel for Microstructure Scale-Refinement, Grain Boundary Engineering, and Surface Modification [PDF]
, 2013 Thermo-mechanical processing plays an important role in materials property optimization through microstructure modification, required by demanding modern materials applications.
Facco, Giovanni Giuseppe
core
Journal of Materials Research and Technology, 2023 In this study, two stainless steel clad plates (STS 316L/A516-70N and STS 304L/A516-70N) were fabricated without Ni interlayers by hot rolling and normalizing under the same conditions, and their microstructures and intergranular corrosion resistances ...
Ju-Chan Jin +5 more
doaj +1 more source
A Knowledge‐Based Approach for Understanding and Managing Additive Manufacturing Data
Advanced Engineering Materials, EarlyView.Additive manufacturing processes generate a large amount of data. Effectively managing, understanding, and retrieving information from this data remains a major challenge. Therefore, we propose an ontology‐based approach to integrate heterogeneous data, enable semantic queries, and support decision‐making.
Mina Abd Nikooie Pour +5 more
wiley +1 more source
International Journal of Electrochemical Science, 2013 Microbiologically influenced corrosion is a serious problem for stainless steels in marine engineering. In this study, the attachment of a typical biofouling microalgae Chlorella vulgaris on the surface of 316L stainless steel was determined by a light ...
Shuxia Liu, Yi Wang, Dun Zhang, Yi Wan
doaj +1 more source
Metals, 2021 Metallic biomaterials are widely used for implants and dental and orthopedic applications due to their good mechanical properties. Among all these materials, 316L stainless steel has gained special attention, because of its good characteristics as an ...
Bruna Horta Bastos Kuffner +4 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.Scandium (Sc)‐doped AlCoCrFeMo HEA coatings are fabricated via flame spraying with 0.1, 0.3, and 0.5 wt% Sc additions. Among these, the HEA‐Sc0.3 coating exhibits the highest corrosion resistance, indicated by a more positive corrosion potential and lower current density.
Pankaj Kumar +7 more
wiley +1 more source
Identification of the mechanism that confers superhydrophobicity on 316L stainless steel
Materials Characterization, 2016 This study develops a rapid method to confer superhydrophobicity on 316L stainless steel surfaces with an amphiphilic reagent such as dodecanoic acid. The highest contact angle (approaching 173°) was obtained after forming hierarchical structures with a non-aqueous electrolyte by an electrolytic process.
Escobar Romero, Ana Maria +2 more
openaire +2 more sources
Nondestructive Testing of Welded Composite Metal Foams
Advanced Engineering Materials, EarlyView.X‐ray computed tomography (CT) is used to evaluate welded steel–steel composite metal foam (CMF) joints of two density classes. It reports variation in postweld spatial void distribution and correlates it to weld‐induced changes, mechanical performance, and failure within welded CMF panels.
Chinmaya Prerana Inguva +2 more
wiley +1 more source
Materials Research Express, 2019 The aim of current investigation is to access in-vitro corrosion performance of flame sprayed titania (TiO _2 ) coated 316L stainless steel, hydroxyapatite (HAp) coated, hydroxyapatite/titania bond coated (HAp/TiO _2 ) 316L stainless steel and plasma ...
Tejpreet Singh Bedi +2 more
doaj +1 more source