Behaviour of semi-rigid composite connections for steel framed buildings [PDF]
During propped construction the steel-concrete composite action resists dead as well as imposed loads. Conversely, the steel section alone resists the floor self-weight in unpropped beams.
Muniasamy, D.
core +6 more sources
Behaviour of long span composite beams with precast hollow-core slabs [PDF]
The use of precast hollow-core concrete slabs with Fabsec steel beams in composite construction has had little research conducted in this area.
Murad, Ali
core +6 more sources
Behaviour and design of composite beams subjected to negative bending and compression [PDF]
This paper investigates the behaviour of steel–concrete composite beams subjected to the combined effectsof negative bending and axial compression. For this study, six full-scale tests were conducted on compositebeams subjected to negative moment while ...
Uy, Brian (R9735) +7 more
core +1 more source
Shear strengthening of concrete T-beams with lateral layers of UHPC [PDF]
Concrete T-beams are commonly used in building slab systems and bridge decks. They may require strengthening in shear when they are deteriorated or when loading requirements increased. This research project studied the shear behaviour of concrete T-beams
Liu Tongxu, Charron Jean-Philippe
doaj +1 more source
EFFECT OF STRENGTHENING METHOD AND DEVELOPMENT LENGTH ON FLEXURAL STRENGTH OF RC BEAMS WITH STEEL PLATES [PDF]
The test result of an experimental study on the flexural strength of reinforced concrete beams strengthened with steel plates is presented. The beams were simply supported and loaded monotonically with two point loads.
RENDY THAMRIN
doaj
Enhancing Composite Steel-Concrete Beams: A Review of Strengthening Techniques, Performance, and Practical Applications [PDF]
This paper reviews structural behavior, load resistance, and various strengthening techniques for composite steel-concrete beams. Composite beams, which combine steel and concrete to exploit the strengths of both materials, are integral to modern ...
Osama Ahmed Ibrahim
doaj +1 more source
Applications of bolted steel plates to shear strengthening of RC beams [PDF]
Many reinforced concrete beams have been found deficiencies in shear due to lack of shear reinforcement. Few researches have been done to investigate shear strengthening of low concrete strength of RC beams using bolted steel plates.
Sudarsana I Ketut +2 more
doaj +1 more source
This research presents the effectiveness of different shear strengthening methods using epoxy bonded steel plates, steel strips, carbon fiber reinforced plastics (CFRP) sheets and externally anchored stirrups for enhancing the shear strength of RC beams.
Ha Minh, Hiroshi Mutsuyoshi
doaj +1 more source
Behavior of RC beams patch repaired and strengthened with FRP composites : a numerical study [PDF]
Includes bibliographical references.Reinforced concrete (RC) beams get deteriorated and become deficient mainly due to corrosion of steel reinforcements, poor maintenance and design, earthquakes and aging.
Mundeli, Salathiel
core +1 more source
Strengthening of Timber Beam with Cold-Formed Steel Plates
This paper describes an experimental program which examined the flexural strengthening of timber beams (50x50x1000 mm) using cold-formed steel (CFS) plates (0.75 mm thick and 30 mm wide). A total of fifteen specimens were tested in three-point bending scheme with a span-depth ratio of 18:1.
Fengky Satria Yoresta, Naresworo Nugroho
openaire +1 more source

