Results 31 to 40 of about 7,010 (230)
Strengthening of Timber Beam with Cold-Formed Steel Plates
This paper describes an experimental program which examined the flexural strengthening of timber beams (50x50x1000 mm) using cold-formed steel (CFS) plates (0.75 mm thick and 30 mm wide). A total of fifteen specimens were tested in three-point bending scheme with a span-depth ratio of 18:1.
Fengky Satria Yoresta, Naresworo Nugroho
openaire +1 more source
Performance of steel beams strengthened with prestressed CFRP laminate
Prestressed Carbon Fibre Reinforced Polymer (CFRP) system is generally used for strengthening reinforced concrete beams where CFRP laminate can improve both the strength and serviceability behaviour of reinforced concrete beams via increasing the ...
M.A. Gharib +3 more
doaj +1 more source
Experimental investigation of CFRP-strengthened steel beams with web openings [PDF]
The introduction of web openings in existing steel floor beams is a common occurrence in practice. Such modifications are often necessary to accommodate additional services driven by a change of building use, thus extending the service life of the structure.
Mohammed J. Altaee +2 more
openaire +1 more source
A Review on Strengthening Steel Beams Using FRP under Fatigue [PDF]
In recent decades, the application of fibre-reinforced polymer (FRP) composites for strengthening structural elements has become an efficient option to meet the increased cyclic loads or repair due to corrosion or fatigue cracking. Hence, the objective of this study is to explore the existing FRP reinforcing techniques to care for fatigue damaged ...
Mohamed Kamruzzaman +3 more
openaire +4 more sources
Shear capacity of reinforced concrete beams strengthened with web bonded steel bars or steel plates
This paper presents the report of two groups of experimental works to study the shear capacity and strain distribution of reinforced concrete beams strengthened on beam sides with the near-surface mounted (NSM) method.
Rendy Thamrin, Zaidir, Aisya Wahyuni
doaj +1 more source
Many researchers worldwide have extensively used fibre-reinforced polymer (FRP) strengthening materials and near-surface mounted (NSM) to enhance the shear and flexural strengths of reinforced concrete (RC) beams.
Nasih Askandar, Abdulkareem Mahmood
doaj +1 more source
Prestressed Steel-Concrete Composite I-Beams with Single and Double Corrugated Web
Composite steel girders with concrete have been used for many years and advances in structural and fabrication technology have established their optimization.
Mahmoud T. Nawar +5 more
doaj +1 more source
Strengthening of steel I-section beams by wire arc additive manufacturing — Concept and experiments
An experimental investigation to assess the major-axis flexural behaviour of 10 hot-rolled steel I-section beams, strengthened by the addition of material through wire arc additive manufacturing (WAAM) and tested under either four-point or three-point ...
Jiachi Yang, M. Wadee, L. Gardner
semanticscholar +1 more source
Parametric Analysis of CFRP Flexural Strengthening of Steel I-Beams Under Monotonic Loading
Externally bonded carbon-fiber-reinforced polymer (CFRP) can increase the flexural capacity of steel beams, but the benefit is often limited by the performance of the adhesive interface.
Pragyan Shrestha +2 more
semanticscholar +1 more source
The effectiveness of a strengthening technique devised for the concrete beams subjected to bending is presented in this study, where recycled-steel fiber-reinforced mortar (RSFRM) panels are used as an eco-friendly replacement for ordinary steel fibers ...
Z. Zamanzadeh +2 more
semanticscholar +1 more source

