Results 41 to 50 of about 175,751,294 (225)

Behavior and Retrofit of Steel I-Beams with Corrosion and Web Openings: Slender Versus Deep Beam Response Under FRP Strengthening

open access: yesBuildings
This study investigates the structural behavior of steel I-beams containing corrosion-induced section loss and web openings, along with the effectiveness of fiber-reinforced polymer (FRP) strengthening as a retrofit strategy.
Dasharath K C   +2 more
doaj   +1 more source

Torsional Strengthening of RC Beams with Near-Surface Mounted Steel Bars

open access: yesAdvances in Materials Science and Engineering, 2020
The strength of reinforced concrete members can be enhanced by using the externally bonded reinforcement (EBR) and near-surface mounted (NSM) methods. However, very few studies have adopted the NSM method for torsional strengthening.
Nasih Habeeb Askandar   +1 more
doaj   +1 more source

Thermomechanical Fatigue and Creep–Fatigue Interaction of Inconel 718 Additively Manufactured by Laser Beam Powder Bed Fusion

open access: yesAdvanced Engineering Materials, EarlyView.
Thermomechanical fatigue tests of laser beam powder bed fusion (PBF‐LB) Inconel 718 show that the additively manufactured material reaches almost the lifetimes of conventionally‐rolled material under no‐dwell conditions. Introducing dwell times at the maximum temperature markedly reduces the lifetimes due to pronounced grain boundary sliding associated
Stefan Guth   +6 more
wiley   +1 more source

Feasibility Study of Strengthening Existing Single Span Steel Beam Concrete Deck Bridges; HR-214, June 1961 [PDF]

open access: yes, 1961
Iowa has the same problem that confronts most states in the United States: many bridges constructed more than 20 years ago either have deteriorated to the point that they are inadequate for original design loads or have been rendered inadequate by ...

core  

Behavior of Beams Strengthened with Steel Fiber RC Overlays

open access: yesJournal of Advanced Concrete Technology, 2009
Strengthening of reinforced concrete beams using steel fiber reinforced concrete (SFRC) overlays has been investigated in the test program described in this paper. Two methods have been used to connect the overlays to the original beams, i.e. chemical and mechanical bonding.
openaire   +3 more sources

Influence of Scan Strategies in Electron Beam Powder Bed Fusion on Solidification, Microstructure, and High‐Temperature Compressive Properties of γ′‐Strengthened Inconel 738LC

open access: yesAdvanced Engineering Materials, EarlyView.
Experiments and thermophysical simulations were conducted to investigate the electron beam powder bed fusion electron beam (PBF‐EB/M) process for the γ′‐strengthened nickel‐based superalloy Inconel 738LC. The results demonstrate the impact of process‐induced microstructural variations on high‐temperature mechanical behavior, providing a basis for ...
Jan Niklas Petenati   +11 more
wiley   +1 more source

Microstructure Modification of Additively Manufactured Mo–9Si–8B by Annealing and Its Effects on High‐Temperature Mechanical Properties

open access: yesAdvanced Engineering Materials, EarlyView.
Postbuild annealing systematically modifies the phase fractions and morphology of EB‐PBF processed Mo–9Si–8B. Quantitative microstructure–property correlations reveal how controlled phase evolution enhances high‐temperature compressive strength and creep resistance.
Christopher Schmidt   +5 more
wiley   +1 more source

Debonding mechanisms of fibre reinforced polymer strengthened steel members. [PDF]

open access: yes, 2011
Applying Fibre Reinforce Polymer (FRP) to steel structures has been proved to be an effective method of strengthening. Experimentally, ageing steel structures such as bridge decks and composite beams which have been strengthened with FRP have shown ...
Akbar, Ibrisam
core  

Embedded Connector in Severe Optimization of Steel Plate for Shear Strengthening of RC Beam: Experimental and Numerical Investigations

open access: yesAdvances in Civil Engineering, 2018
Environmental impact has become one of the major factors taken into consideration for recent civil engineering studies and projects. Thus, researchers have been concentrating on shear strengthening of existing reinforced concrete structure as an upgrade ...
Md. Ashraful Alam   +3 more
doaj   +1 more source

Investigation of Steel I-Beams Strengthened Using CFRP and BFRP Sheets under Torsion

open access: yesAdvances in Civil Engineering, 2023
Torsional demand acting on beams can significantly effect structural behavior and cause high-local stresses. The torsional resistance of beams can be potentially increased by using fiber-reinforced polymer (FRP) sheets.
Emine Aydin
doaj   +1 more source

Home - About - Disclaimer - Privacy