Results 11 to 20 of about 95 (94)
This paper discusses the step and touch voltages, based on body resistance, in a grounding grid after a lightning strike at a 434-/21-kV substation. To ensure grounding grid safety, the maximum step and touch voltage should not exceed the safety criteria
Saeid Gholami Farkoush +5 more
doaj +1 more source
Analytical Model of Torque-Prediction for a Novel Hybrid Rotor Permanent Magnet Machines
This paper presents an analytical method for predicting the electromagnetic performance in permanent magnet (PM) machine with the spoke-type rotor (STR) and a proposed hybrid rotor structure (HRS), respectively.
Yu-Xi Liu +5 more
doaj +1 more source
Grid-Impedance-Based Transient Current Control for Offshore Wind Turbines under Low-Voltage Fault
In order to enhance the transient stability of offshore wind turbines (OWTs) in marine energy systems, the grid codes stipulate that OWTs should possess the low-voltage ride-through (LVRT) ability of being grid-tied and injecting reactive current during ...
Zhichao Yang +3 more
doaj +1 more source
Impact of QSW‐ZVS on Input EMI Filter Design in DC‐DC Converters
This paper analyzes the impact of quasi‐square wave zero voltage switching (QSW‐ZVS) on passive EMI filter design for DC‐DC buck converters. The extra element theorem (EET) is used to derive the design quantities that ensure converter performance is not altered, and the resulting damping element values are compared with those of traditional converters.
Silvia Simone +3 more
wiley +1 more source
Triboelectric nanogenerator–dielectric elastomer actuator hybrid systems establish a unified platform that directly couples mechanical energy harvesting with high‐voltage soft actuation, enabling self‐sustained operation without external power sources. This review provides a comprehensive overview of their working principles, hybrid configurations, and
Jiwon Jang +8 more
wiley +1 more source
The rise of renewable energy sources is accompanied with a depletion of raw materials used in batteries. The project summarized in this paper presents a system aiming to estimate the SOC and SOH of Lithium‐Ion Battery. This is achieved Using Mixed H∞/H2 Control with Sliding Mode Observer.
Chadi Nohra +4 more
wiley +1 more source
This paper builds an admittance model for a DFIG‐STATCOM parallel system. Based on the system, the paper provides a method to optimise the control of the STATCOM, which aims to increase the performance of the system during symmetrical faults .
Wenhao Du +5 more
wiley +1 more source
This paper analyzes the robustness of a current‐controlled quasi‐stationary electrical model virtual synchronous machine. Fundamental limitations of structured singular value‐based stability analysis are revealed for nonlinear converter‐dominated power systems when parametric uncertainties significantly affect the operating point.
Christina Zuromski +3 more
wiley +1 more source
A new Python‐based methodology that combines the advantages of two established techniques for analysing electrical power systems is presented. An innovative closed‐loop automation solution of IBRs modelled in HD and its integration into power flow analysis in PSS/E is presented.
Mostafa Abdo +4 more
wiley +1 more source
Consideration of Active Power in the SVC Control System for Flicker Mitigation in Wind Farms
This study integrates active power alongside reactive power inside the control system of static VAr compensator for flicker mitigation. The concurrent forecasting of active power and reactive power is done for 10 ms ahead through adaptive filter techniques, with real‐time updates of the autoregressive moving average model coefficients.
Mehrdad Bandani, Haidar Samet
wiley +1 more source

