Results 321 to 330 of about 13,658,456 (395)
Some of the next articles are maybe not open access.
, 2020
In this study, different thermomechanical treatment (TMT) routes, combining hot, warm and cold rotary forging with post-deformation annealing at different temperatures, were applied to Ti-18Zr-14Nb shape memory alloy to study the influence of these TMTs ...
A. Kudryashova +7 more
semanticscholar +1 more source
In this study, different thermomechanical treatment (TMT) routes, combining hot, warm and cold rotary forging with post-deformation annealing at different temperatures, were applied to Ti-18Zr-14Nb shape memory alloy to study the influence of these TMTs ...
A. Kudryashova +7 more
semanticscholar +1 more source
, 2020
The influence of thermomechanical treatment (temperature 60 °C – 100 °C and shear rate 0.05 s−1 – 50 s−1) on the denaturation and aggregation of β-Lactoglobulin at high concentrations (50 % – 70 %) was investigated.
M. Quevedo +3 more
semanticscholar +1 more source
The influence of thermomechanical treatment (temperature 60 °C – 100 °C and shear rate 0.05 s−1 – 50 s−1) on the denaturation and aggregation of β-Lactoglobulin at high concentrations (50 % – 70 %) was investigated.
M. Quevedo +3 more
semanticscholar +1 more source
, 2020
The fast-growing world needs higher strength material with a lower weight; this implies more number of researchers focused on the material research environment.
A. Rajasekaran, R. Pugazhenthi
semanticscholar +1 more source
The fast-growing world needs higher strength material with a lower weight; this implies more number of researchers focused on the material research environment.
A. Rajasekaran, R. Pugazhenthi
semanticscholar +1 more source
Anaerobic treatment of hemp thermomechanical pulping wastewater
Water Research, 1998Abstract Biological treatment is an indispensable instrument for water management of non-wood pulp mills, either as internal measure or end of pipe. In this paper, anaerobic treatment of wastewaters derived from the thermomechanical pulping (TMP) of hemp (Cannabis sativa L.) is described.
Kortekaas, S. +4 more
openaire +2 more sources
Thermomechanical treatments of a 1050 pearlite steel
Metallurgical Transactions A, 1983A study of the microstructures and mechanical properties of thermomechanically treated 1050 steel has been carried out. The materials were first transformed to fine and coarse lamellar pearlite structures. These samples were reduced 75 pct in thickness by cold rolling, then heat treated at 780 °C (up-quenching) or 650 °C (annealing) for different ...
L. J. Chen, T. W. Wu, H. C. Cheng
openaire +1 more source
Thermomechanical treatment of R18 steel
Metal Science and Heat Treatment, 19681. After HTTMT of high-speed steel R18 by the optimum method the bending strength is 440 kg/mm2; after the standard treatment is 250 kg/mm2. 2. Reduction of the deformation temperature leads to impoverishment of the solid solution in carbon and alloying elements, promotes the precipitation and coalescence of carbides, and sharply reduces
V. S. Tomsinskii +3 more
openaire +1 more source
Materials Science & Engineering: A, 2019
The microstructure, mechanical properties, and formability of friction stir welded (FSW) Al alloys after thermomechanical treatment are investigated using detailed microstructural characterization and numerical simulation.
Q. Pang +3 more
semanticscholar +1 more source
The microstructure, mechanical properties, and formability of friction stir welded (FSW) Al alloys after thermomechanical treatment are investigated using detailed microstructural characterization and numerical simulation.
Q. Pang +3 more
semanticscholar +1 more source
Thermomechanical treatment of 2014 aluminium alloy
Materials Science and Technology, 1988AbstractThe effect of thermomechanical treatment on the flow stress, fracture strain, structure, and precipitation behaviour of commercial grade 2014 aluminium alloy has been investigated. Specimens in the supersaturated and aged conditions were plastically deformed in torsion tests in the temperature range 293–493 k and strain rate range 2·8 ×10−3−2·5
J. Gronostajski, A. Tobota
openaire +1 more source
Thermomechanical treatment of titanium alloys
Metal Science and Heat Treatment of Metals, 19621. The best results from TMT on alloy VTZ-1 are attained after deformation at 850° with subsequent tempering. 2. The mechanical properties of titanium alloys subjected to TMT, regardless of the operating conditions, are higher than if these alloys are subjected to heat treatment only, without deformation.
openaire +1 more source
Journal of Rare Earths, 2019
A spheroidal Al3(Zr,Sc) precipitate with a double-shell structure, comprising a Sc-enriched core enveloped by a Zr-enriched inner shell and a Sc-enriched outer shell (∼9 nm in thickness), appears in an Al–0.2Zr–0.1Sc alloy cable after thermomechanical ...
Jiayi Zhang +4 more
semanticscholar +1 more source
A spheroidal Al3(Zr,Sc) precipitate with a double-shell structure, comprising a Sc-enriched core enveloped by a Zr-enriched inner shell and a Sc-enriched outer shell (∼9 nm in thickness), appears in an Al–0.2Zr–0.1Sc alloy cable after thermomechanical ...
Jiayi Zhang +4 more
semanticscholar +1 more source