Results 91 to 100 of about 3,331 (222)
Experimental investigation of straight shape thermosyphon filled with R410A refrigerant [PDF]
, 2019 The thermal performances of a R410A filled thermosyphon subjected to low heat flux from 1882 W/m2 to 4423 W/m2 and evaporator wall temperatures between 20 °C and 40 °C with fill ratios 0.75 and 1.00 and at different inclinations from 45° to 90° were ...
Uddin, Mohammad Faisal +2 more
core +1 more source
Design and Development of an Energy-Efficient Suki Sauce Stirrer: A Novel Concept Study [PDF]
E3S Web of ConferencesThis study presents the design and evaluation of an energy-efficient sukiyaki sauce stirrer incorporating thermosyphon technology to reduce both heating time and fuel consumption.
Booddachan Khridsadakhon +5 more
doaj +1 more source
E3S Web of Conferences, 2018 Devices called reverse thermosyphon enable passive heat transfer when the heat source is above the place of its receipt. This is often the case in solar installations for the preparation of hot water.
Duda Michal +2 more
doaj +1 more source
Use of LHP for cooling power electronic components
EPJ Web of Conferences, 2013 The paper deals with use of cooling equipment build on basis two phase thermosyphon loop. This device belongs to a group of loop heat pipe (LHP).
Kolková Z. +3 more
doaj +1 more source
Passive, gravity-driven thermosyphons represent a stepchange in technology towards the goal of greatly reducing PUE (Power Usage Effectiveness) of datacenters by replacing energy hungry fans of air-cooling approach with a highly-reliable solution able to
Haynau, Remy +4 more
core +1 more source
Application of nanofluids in thermosyphons: A review
, 2018 Nanofluids are widely used in recent years in order to enhance heat transfer in several mediums. Thermal perfor-mance of thermosyphons can be improved by employment of nanofluids. In this study, a comprehensive reviewis conducted on the studies focused on the thermosyphonsfilled with nanofluids.
Ramezanizadeh, Mahdi +3 more
openaire +1 more source
Field Experiment of Top-Heat Thermosyphon
, 2011 Three types of thermosyphon were tested. Type-1 has a horizontal condenser with a 536ml volume buffer chamber. The vertical heat transfer height was 3m. In type-2, condenser and connecting pipe were tilted by 10° to the ground with 3776ml buffer chamber.
Naoto Hagino +2 more
core +1 more source
Investigation of the thermosyphon performance for different working fluids
, 2017 This study investigated a thermosyphon performance using different types of working fluids. Gravity assisted heat pipe of 15mm diameter, and 300 mm long with a thermal capacity of 240W was designed, fabricated and tested.
Farah Nadhirah
core
Titanium-Water Thermosyphon Gamma Radiation Exposure and Results [PDF]
, 2012 Titanium-water thermosyphons are being considered for use in heat rejection systems for fission power systems. Their proximity to the nuclear reactor will result in some gamma irradiation.
Jaworske, Donald, A. +2 more
core
General Thermosyphon Simulation Code for Electronics Cooling Applications
Two-phase micro-scale cooling implemented with passive, gravity-driven closed-loop thermosyphons represents a highly-reliable solution to increase heat dissipation and to maximize energy efficiency of the next-generation electronics cooling technologies.
Amalfi, Raffaele L. +3 more
core +1 more source