Results 1 to 10 of about 228,582 (180)
PREDICTING THICKNESS SWELLING OF HOT PRESSED WOOD STRANDS
BioResources, 2012 Strand board can be manufactured from sawmill residues, branches, and crown wood left in the forest. The thickness swelling of these residues is quite different from that of mature wood and can have a negative effect on the physical and strength ...
Elisha Ncube
doaj +3 more sources
Drvna Industrija, 2022 Long-term hygroscopic thickness swelling rate of polypropylene (PP) composites filled with thermally treated wood flour was investigated. The beech wood chips were heat treated at 120 °C, 150 °C or 180 °C for 30 or 120 min using saturated steam in a ...
Seyyed Khalil Hosseinihashemi +5 more
doaj +3 more sources
A Study on water absorption and thickness swelling behavior of wood flour/glass fiber hybrid composites [PDF]
تحقیقات علوم چوب و کاغذ ایران, 2009 This research focused on the influence of content (5, 10 and 15 %) of glass fiber on the water absorption and thickness swelling of wood flour/E-glass fiber hybrid polypropylene composites without and with MAPP.
Alireza Ghotibi far +2 more
doaj +1 more source
PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD FROM Eucalyptus grandis PRODUCED BY UREA FORMALDEHYDE RESIN WITH SiO2 NANOPARTICLES [PDF]
Engenharia Agrícola, 2020 The use of nanoparticles appears to be a feasible option for improving the quality of a range of wood-based products. Studies show that they can improve both the physical and mechanical properties of wood and wood-based products.
Ana C. M. Valle +4 more
doaj +2 more sources
The influence of veneer modification on the properties of plywood glued with thermoplastic LDPE film
Наукові праці Лісівничої академії наук України, 2023 Plywood glued with thermoplastic films is a promising material in furniture production. After all, the replacement of liquid thermosetting adhesives with dry thermoplastic films in the technological process of plywood production not only provides a ...
Pavlo Bekhta +6 more
doaj +1 more source
Journal of Natural Fibers, 2023 The water absorption, chemical resistance, and biological properties are contributing factors to the overall performance of bio-composites, especially for outdoor applications.
K. Setswalo +6 more
doaj +1 more source
Thickness-Dependent Swelling Behavior of Vapor-Deposited Smart Polymer Thin Films [PDF]
Macromolecules, 2018 In this contribution, the temperature-dependent swelling behavior of vapor-deposited smart polymer thin films is shown to depend on cross-linking and deposited film thickness. Smart polymers find application in sensor and actuator setups and are mostly fabricated on delicate substrates with complex nanostructures that need to be conformally coated.
Fabian Muralter +2 more
openaire +5 more sources
Thickness-Dependent Swelling Behavior of Vapor-Deposited Hydrogel Thin Films [PDF]
EUROSENSORS 2018, 2018 Hydrogel thin films containing temperature sensitive chemical functionalities (such as N-isopropylacrylamide, NIPAAm) are particularly interesting for sensor and actuator setups. Complex 3D structures can be conformally coated by the solvent free technique initiated Chemical Vapor Deposition, with precise control over chemical composition and film ...
Fabian Muralter +2 more
openaire +3 more sources
BioResources, 2022 Most wood properties are affected by changes in moisture content below the wood fiber saturation point. In this study, the thickness swelling ratios of laminated veneer lumber (LVL) produced from Scotch pine (Pinus sylvestris L.) bonded by using ...
Rasit Esen, Erkan Likos, Gözde Zengin
doaj +2 more sources
Calcium decreases cell wall swelling in sweet cherry fruit
Scientific Reports, 2022 Swelling of epidermal cell walls decreases cell-to-cell adhesion and increases cracking susceptibility in sweet cherry. Ca is suggested to decrease cracking susceptibility by crosslinking of cell wall components and, possibly, by decreasing swelling. The
Christine Schumann +2 more
doaj +1 more source