Results 81 to 90 of about 403,777 (309)
Advances in Civil Engineering, 2013 High performance fibre reinforced concrete (HPFRC) is a modern structural material with a high potential and with an increasing number of structural applications.
Francesco Bencardino
doaj +1 more source
Determination of Stress Intensity Factor Value for Chevron-Notched Specimens – Pilot Study
Transactions of the VŠB: Technical University of Ostrava, Civil Engineering Series, 2017 The description of material behavior is one of important information for its application in civil engineering. One area is covering fracture mechanical properties.
Sobek Jakub, Seitl Stanislav
doaj +1 more source
The experimental determination of tyre model parameters [PDF]
, 1966 SUMMARY This report describes the analysis of a series of experiments on pneumatic tyres which were designed to test the various hypotheses: regarding the deformed shape of a tyre during the steering process.
Ellis, J. R., Frank, F., Hinton, B. J.
core
Advanced Engineering Materials, EarlyView.Four‐point bending tests are conducted in an argon atmosphere on commercial MgO‐C brick grades with and without MgO‐C recyclate from room temperature up to 1300 °C. No detrimental effect of the MgO‐C recyclates on bending strength is found. Instead, a decisive influence of the total carbon content is observed, with lower total carbon contents ...
Alexander Schramm +5 more
wiley +1 more source
Application of the continuum damage mechanics model in the three point bending test of Ti-6Al-4V titanium alloy specimens [PDF]
, 2013 One of the most important and challenging activities in the simulation of the mechanical behaviour of materials is the prediction of the failure phenomena.
Allahverdizadeh, N. +2 more
core
On a damage-plasticity approach to model concrete failure
, 2009 A damage-plasticity constitutive model for the description of fracture in plain concrete is presented. Two approaches, the local model comprising the adjustment of the softening modulus and the nonlocal model based on spatial averaging of history ...
Grassl, Peter
core +1 more source
Crack-front propagation during three-point-bending tests of polymethyl-methacrylate beams [PDF]
, 2010 Crack front evolution in polymethyl methacrylate (PMMA) beams was measured during quasi static three point bending tests performed on a universal testing machine.
Fernández Sáez, José +2 more
core +2 more sources
Advanced Engineering Materials, EarlyView.Phase‐changing liquids enable untethered pneumatic actuation in soft robotics but suffer from volatility and storage challenges. This work reports a simple method to encapsulate Novec 7000 within micron‐thin alginate shells via in situ injection and ionic crosslinking.
Rayan A. M. Basodan +3 more
wiley +1 more source
The effect of moisture content over the fibre saturation points on the impact strength of wood
Royal Society Open ScienceThe article's main aim is to assess the mechanical behaviour of linden under high-rate loadings (impact) and its change due to changes in moisture content (MC) over fibre saturation point. For assessing the mechanical properties of green wood, mainly the
Mojtaba Hassan Vand, Jan Tippner
doaj +1 more source
Temperature-dependent behaviour of glass/ionomer laminates: preliminary test results [PDF]
, 2008 For this research, torsion tests and three-point bending tests were executed on glass/ionomer laminates under controlled temperature (5 C to 65 C) and relative humidity (50%) conditions. This article presents some preliminary test results.
Belis, Jan +3 more
core +1 more source