Results 21 to 30 of about 160,183 (291)
Energies, 2021 To explain the effect of tip leakage flow on the performance of an axial-flow transonic compressor, the compressors with different rotor tip clearances were studied numerically. The results show that as the rotor tip clearance increases, the leakage flow
Botao Zhang +3 more
doaj +1 more source
Numerical analysis for the effect of tip clearance in a low specific speed mixed-flow pump
Advances in Mechanical Engineering, 2019 To study the influence of tip clearance on performance (external characteristics, pressure fluctuation and tip loss) of a low specific speed mixed-flow pump, unsteady simulation was performed for the whole flow passage with five tip clearance sizes ( δ 0
Zhiyi Yu +3 more
doaj +1 more source
Numerical simulation of tip clearance impact on a pumpjet propulsor
International Journal of Naval Architecture and Ocean Engineering, 2016 Numerical simulation based on the Reynolds Averaged Navier–Stokes (RANS) Computational Fluid Dynamics (CFD) method had been carried out with the commercial code ANSYS CFX. The structured grid and SST k–ω turbulence model had been adopted.
Lin Lu, Guang Pan, Jing Wei, Yipeng Pan
doaj +1 more source
Energy Performance and Flow Patterns of a Mixed-Flow Pump with Different Tip Clearance Sizes
Energies, 2017 Tip clearance between blade end and shroud is inevitable in pump operation and of great importance on pump energy performance and pressure fluctuation. As the tip clearance size increases, the head and efficiency of the mixed flow pump drop accordingly ...
Yabin Liu, Lei Tan, Yue Hao, Yun Xu
doaj +1 more source
An Improved Blade Vibration Parameter Identification Method considering Tip Clearance Variation
Shock and Vibration, 2021 Blade tip timing (BTT) technology is the most effective means for real-time monitoring of blade vibration. Accurately extracting the time of blade tip reaching the sensors is the key to ensure the accuracy of the BTT system. The tip clearance changes due
Liang Zhang, Qidi Wang, Xin Li
doaj +1 more source
Influences of Tip Cooling Injection on Tip Clearance Control at Design and Off-Design Incidences
International Journal of Rotating Machinery, 2009 A numerical investigation has been performed to study the influences of cooling injection from the blade tip surface on controlling tip clearance flow in an unshrouded, high-turning axial turbine cascade.
Maosheng Niu, Shusheng Zang
doaj +1 more source
Experimental study of controlling tip clearance flow in a pump-jet propulsor
Zhongguo Jianchuan Yanjiu, 2023 ObjectiveThis paper aims to suppress the adverse effects of tip clearance flow on the hydrodynamic performance and unsteady excitation force of a pump-jet propulsor. MethodAs for the pre-swirl stator pump-jet propulsor, an annular flexible seal structure
Ruilin HAN +5 more
doaj +1 more source
Scientific Reports, 2022 In a multiphase pump, tip clearance is the required distance between the blade tip and the pump body wall of the impeller, forming tip leakage vortex (TLV), causing unstable flow and energy dissipation.
Zekui Shu +4 more
doaj +1 more source
Energy performance and flow characteristics of a multiphase pump with different tip clearance sizes
Advances in Mechanical Engineering, 2019 Deep sea oil resources worldwide possess great potential for exploration; however, multiphase medium technology requires urgent development. The multiphase pump has achieved great success as one of the most advanced machinery in underwater oil and gas ...
Jinsong Zhang +3 more
doaj +1 more source
A review of blade tip clearance–measuring technologies for gas turbine engines
Measurement + Control, 2020 Blade tip clearance is one of the important parameters affecting the performance, safety and stability of a gas turbine engine. However, it is difficult to measure the tip clearance in real time and accurately during the development and test process of ...
Bing Yu +3 more
doaj +1 more source