Results 41 to 50 of about 1,347 (142)

Effect of sintering cycle on the strength and translucency of multilayered zirconia

Journal of Prosthodontics, EarlyView.
Abstract Purpose A newly introduced sintering protocol promises to offer higher translucency while not significantly compromising the flexural strength of the material. However, the effect of the novel sintering protocol has not been thoroughly validated.
Kedith Sawangsri, Steven Makowka, Sompop Bencharit, Hyeongil Kim   +3 more
wiley   +1 more source

Influence of the color of 3D‐printed scan aids on the trueness of complete arch digital scans

Journal of Prosthodontics, EarlyView.
Abstract Purpose To determine the influence of using 3D‐printed scan aids in varying colors on the trueness of digital scans. Materials and Methods A master cast with five multi‐unit analogues was scanned. The acquired dataset was exported to standard tessellation language (STL) file format to serve as the reference STL. 3D printing of the prototype in
Özay Önöral, Selin Çakır
wiley   +1 more source

Surface gloss and micro‐CT analysis of additively and subtractively manufactured resin composites and zirconia after simulated tooth brushing with different bristle types and toothpaste formulations: An in vitro study

Journal of Prosthodontics, EarlyView.
Abstract Purpose This study aimed to evaluate the effects of simulated tooth brushing with different bristle types and two toothpaste formulations on the surface gloss and structural integrity of additively (AM) and subtractively (SM) manufactured resin composites and zirconia.
Ahmet Faruk Ertürk, Rafat Sasany, Seyed Ali Mosaddad, Merve Yelken Kendirci   +3 more
wiley   +1 more source

Effect of material, prosthesis height, and aging on the fracture strength of additively and subtractively manufactured implant‐supported cantilevered prostheses

Journal of Prosthodontics, EarlyView.
Abstract Purpose This study aimed to evaluate the inherent and after cyclic loading fracture strength of implant‐supported cantilevered fixed prostheses fabricated from recently introduced additively manufactured (AM) and subtractively manufactured (SM) materials, considering variations in prosthesis height.
Mustafa Borga Dönmez, Paola Maldonado, Çiğdem Kahveci, Ahmet Orgev, Marta Revilla‐León, Burak Yilmaz, Gülce Cakmak   +6 more
wiley   +1 more source

A digital workflow for full‐arch implant fixed prosthesis: Clinical application of a 3D‐printed polychromatic flangeless trial denture, anatomic bone reduction guide, and intraoral scanning for definitive prosthesis fabrication

Journal of Prosthodontics, EarlyView.
Abstract This clinical report presents a comprehensive digital workflow for rehabilitating a patient with maxillary terminal dentition using a full‐arch, implant‐supported fixed dental prosthesis (FP‐1). It highlights the integration of a 3D‐printed polychromatic flangeless trial denture and a customized anatomic bone reduction template, enabling ...
Weiqing Liu, Toshiki Nagai, Wei‐Shao Lin   +2 more
wiley   +1 more source

Effects of gastric acid on surface roughness, microhardness, fracture strength, and color change of dental ceramics: A systematic review of in vitro studies

Journal of Prosthodontics, EarlyView.
Abstract Purpose This systematic review evaluated the effects of simulated gastric acid (SGA) on surface and mechanical properties of dental ceramics to answer the research question: Does immersion in SGA alter the surface roughness, microhardness, fracture strength, and color of dental ceramics?
Geany Ferreira Rodrigues, Isaac Augusto Dantas Nogueira, Nicole Escórcio de Meneses, Ana Letícia Daniel Fontenele, Francisbênia Alves Silvestre, Ana Carolina Lima Moreira, Lívia Maria Sales Pinto Fiamengui, Karina Matthes de Freitas Pontes, Raniel Fernandes Peixoto   +8 more
wiley   +1 more source

The effects of material thicknesses and substrates on the translucency and color masking ability of additively manufactured definitive crown materials

Journal of Prosthodontics, EarlyView.
Abstract Purpose To investigate the translucency of the new 3D‐printable materials concerning thickness and the color masking ability of each material against different substrate colors. Materials and Methods Ninety square‐shaped specimens (12.0 mm × 12.0 mm) of two new 3D‐printable materials: ceramic‐infiltrated hybrid resin composite (VS) and light ...
Ting Wang, Yun‐Ju Wang, Chao‐Chieh Yang, John A. Levon, Tien‐Min G. Chu, Wei‐Shao Lin   +5 more
wiley   +1 more source

Wear properties of esthetic dental materials against translucent zirconia

Dental Materials Journal, 2019
To clarify the influence of translucent tetragonal zirconia polycrystals (TZP) on wear properties of esthetic dental materials, two-body wear test was performed using translucent TZP as abrader specimen, and bovine tooth enamel (BTE), two resin composites including hybrid filler (CRH) and nano filler (CRN), two glass ceramics including leucite ...
Shota, Hayashi, Shinya, Homma, Takuya, Takanashi, Tomoki, Hirano, Masao, Yoshinari, Yasutomo, Yajima   +5 more
openaire   +3 more sources

Marginal Misfit Assessment in Common Restorative Materials for Cement‐Retained Fixed Implant Prostheses: An In Vitro Comparative Study

Clinical and Experimental Dental Research, Volume 12, Issue 2, April 2026.
ABSTRACT Objectives To assess the vertical discrepancy at the abutment–crown interface (ACI) for cement‐retained crowns fabricated from three commonly used restorative materials across implants featuring external and internal connections. Materials and Methods A total of 30 implants with external (EC) and internal (IC) connections were included in this
Pedro Diaz, Barbara Miegimolle, Antonio Martin, Seyed Ali Mosaddad, Celia Tobar, Maria J. Suarez   +5 more
wiley   +1 more source

Optical stability of 3D‐printed and milled zirconia after artificial aging and immersion in liquids: An in vitro study

Journal of Prosthodontics, Volume 35, Issue 3, Page 375-381, March 2026.
Abstract Purpose To assess the impact of artificial aging and immersion in common liquids on the optical properties of 3D‐printed and milled zirconia. Materials and Methods Monolithic zirconia discs (N = 100) were fabricated using two methods: 3Y‐TZP for milling (e.max ZirCAD LT BL, Ivoclar Vivadent) and printable 3Y‐TZP material (LithaCon 3Y 230) for ...
Athanasios E. Rigos, Matthew J. Kesterke, Jenn‐Hwan Chen, Eleana Kontonasaki, Elias D. Kontogiorgos   +4 more
wiley   +1 more source