Results 61 to 70 of about 473 (275)

Study on neural network proportional-integration-differential (PID) control strategy of the molten metal pool level in the twin roll casting process

Metalurgija, 2020
In the twin-roll casting process, how to accurately control the molten metal pool level is a key problem to produce high quality strip. In this paper, the mathematical model about the pool level control is set up based on the process characteristics ...
S. Y. Guan, W. Y. Zhang, X. Xia, Y. F. Jiang   +3 more
doaj  

Applying crystallographic orientation analysis for exploring deformation mechanism of 6.5 wt.% Si electrical strip during twin-roll thin strip casting process

Journal of Materials Research and Technology, 2021
The study described here is aimed at illuminating deformation mechanism involved in Twin-roll Thin Strip Casting Process (TRSC) with respect to high-permeability 6.5 wt.% Si electrical strip (6.5 wt.% Si strip) in terms of crystal plasticity (CP) theory,
W.L. Hu, Y.X. Zhang, G. Yuan, X.M. Zhang, J.H. Zhao, G.D. Wang   +5 more
doaj   +1 more source

A Versatile‐Designable Framework for Active and Programmable Shape‐Morphing Soft Matter Systems: From Inverse Design to Closed‐Loop Control

Advanced Science, EarlyView.
A versatile framework integrates addressable electrothermal actuation and strain‐constraint mechanisms to construct programmable shape‐morphing soft matter systems. By combining an analytical inverse design strategy for high‐fidelity 3D surface reconstruction with deep learning‐based closed‐loop control, this approach enables zero‐energy shape locking,
Kai Liu, Peiling Xie, Ruitong Song, Banghan Liu, Rui Guo, Jiu‐an Lv   +5 more
wiley   +1 more source

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TWIN-ROLL STRIP CAST MG ALLOYS

, 2019
Development of wrought Mg alloys, particularly in sheet form, is essential to support the growing interest for lightweight components in the automotive industry.
Bae, GT, Park, SS, Lee, JG, Kim, NJ, Kang, DH, Shin, KS   +5 more
core   +2 more sources

Liquid Metals in Radio Frequency Applications: A Review of Physics, Manufacturing, and Emerging Technologies

Advanced Electronic Materials, EarlyView.
This paper reviews the physics of liquid metals in RF devices, including the influence of mechanical strain on resonance as well as fabrication methods and strategies for designing tunable and strain‐tolerant inductors, capacitors, and antennas.
Md Saifur Rahman, William J. Scheideler
wiley   +1 more source

The performance of TiB, and TiC bearing grain refiners in twin roll strip casting

, 2002
The master alloys based on the Al-Ti-b system have been used extensively for grain refining aluminum alloys. The TiB2 particles in commercial AlTiB master alloys, however, are rather coarse and have a tendency to agglomerate both during the manufacturing
Ucuncuoglu, S, Dundar, M, Cakir, O, Akkurt, AS, Birol, Y   +4 more
core   +1 more source

Chronic Disease Monitoring Using Advanced Compliant Materials for Bioelectronics

Advanced Electronic Materials, EarlyView.
Compliant bioelectronic systems enable continuous monitoring of chronic disease through soft, stretchable materials and tissue‐conformal designs that support stable electrophysiological, mechanical, and biochemical sensing. Integration of diverse sensing modalities with thoughtful material selection, device architectures, and advanced fabrication ...
Han Kim, Mabel Bartlett, Liyang Wang, Karl Bates, Mengdi He, Myungbo Kim, Carmel Majidi, Tzahi Cohen‐Karni   +7 more
wiley   +1 more source

Self‐Adhesive Conductive Elastomers for Gel‐Free Biopotential Recording

Advanced Electronic Materials, EarlyView.
σPOMaC, a self‐adhesive conductive citrate elastomer incorporating PEDOT:PSS and DBSA, enables gel‐free biopotential electrodes with stable conductivity and intrinsic skin adhesion. The composite exhibits low resistivity (∼ 0.02 Ω·cm), robust electrical performance during repeated use, and reliable on‐body ECG acquisition comparable to Ag/AgCl ...
Kirstie M. K. Queener, Alec Brewer, He Sun, Jack Twiddy, Vladimir A. Pozdin, Koji Sode, Alper Bozkurt, Michael Daniele   +7 more
wiley   +1 more source

Homogenization of a twin-roll cast thin Al–Mn strip

Journal of Alloys and Compounds, 2009
Abstract A sound homogenization practice was investigated for thin Al–Mn strips. The structure in the as-cast state reveals features typical of rapid solidification. The impact of subsequent hot rolling of the just solidified strip in the caster roll gap is also evident.
openaire   +2 more sources

Sulfide‐Based Electrolytes for All‐Solid‐State Sodium Batteries

Advanced Energy Materials, EarlyView.
This review covers the structural features and synthesis strategies of sulfide‐based solid electrolytes, as well as critical challenges related to conductivity, interfacial and moisture stability, and scaling‐up for practical application in Sodium‐based All Solid‐State Batteries.
Han Yang, Luca Weckelmann, Baolin Wu, Chih‐Long Tsai, Luc Raijmakers, Rüdiger‐A. Eichel, Anna Windmüller   +6 more
wiley   +1 more source