Results 1 to 10 of about 2,478 (264)
Assessment of Steel Subjected to the Thermomechanical Control Process with Respect to Weldability
Metals, 2018 The study is concerned with the assessment of the weldability of steel S700MC subjected to the thermomechanical control process (TMCP) and precipitation hardening and characterised by a high yield point.
Jacek Gorka, Gorka Jacek
exaly +3 more sources
Metals, 2023 This study presents information on the behavior of paint baking (PB) after resistance spot welding of the 5- and 6xxx series aluminum alloys. The weld parameters are optimized, and the weld specimens are baked three times for 20 min at 180 °C to simulate
Hong-geun Park +5 more
doaj +1 more source
Assessment of the Hot Cracking Susceptibility of the Inconel 617 Nickel-Based Alloy [PDF]
Archives of Metallurgy and Materials, 2020 Nickel alloys, despite their good strength properties at high temperature, are characterized by limited weldability due to their susceptibility to hot cracking.
J. Adamiec, N. Konieczna
doaj +1 more source
Weldability and Mechanical Properties of Fe/Al Dissimilar Joints by Resistance Spot Weld Bonding
Engineering Proceedings, 2023 In this study, weldability and mechanical properties of resistance spot weld bonding were investigated when adhesives with different properties were used.
Shoma Sakurai +3 more
doaj +1 more source
Experimental methods for assessing the propensity of welded joints to local fault [PDF]
E3S Web of Conferences, 2023 The problem of increasing the resistance of welded joints of power equipment against local destruction in the conditions of non-stationary mode of high-temperature operation is relevant.
Poletaev Yu., Shchepkin V.
doaj +1 more source
Development of new 7%Ni steel for LNG storage tanks
You-qi chuyun, 2021 Considering the scarcity of nickel in China and cost-saving for construction of LNG storage tanks, it is very significant to develop a new generation of low-nickel steel for storage tanks.
Kaili CHEN +4 more
doaj +1 more source
Archives of Metallurgy and Materials, 2016 In the present study, the investigation of weldability of ultra-high strength steel has been presented. The thermal simulated samples were used to investigate the effect of welding cooling time t8/5 on microstructure and mechanical properties of heat ...
Węglowski M. St. +2 more
doaj +1 more source
Metals, 2021 The battery performance of electric vehicles depends on the density and capacity of the battery; thus, the battery cells must be assembled in as many layers as possible.
Seungmin Shin +4 more
doaj +1 more source
Archives of Metallurgy and Materials, 2016 In the paper the results of metallographic examination and mechanical properties of electron beam welded joint of quenched and tempered steel grade S690QL are presented.
Błacha S. +3 more
doaj +1 more source
Friction Weldability of UFG 316L Stainless Steel [PDF]
Archives of Metallurgy and Materials, 2019 The broad range applications of Ultra-Fine Grained metals is substantially limited by the lack of a welding method that allows them to be joined without losing the strong refinement of structure. From this point of view, the solid state welding processes
B. Skowrońska +5 more
doaj +1 more source