Results 11 to 20 of about 9,987 (304)
CLADDING WELDABILITY STUDY. [PDF]
This report evaluates the effects of processing and fabrication variables on the weldability of Type 316 stainless steal fuel pin cladding.
Elliot, D.N., Ray, W.E.
openaire +4 more sources
Effect of the Initial Grain Size on Laser Beam Weldability for High-Entropy Alloys
This study investigated the effect of the initial grain size on the laser beam weldability of CoCrFeMnNi high-entropy alloys (HEAs). Cold-rolled, annealed, and cast HEAs with different initial grain sizes exhibited clear differences in weldability.
Cheolho Park +4 more
doaj +2 more sources
Weldability of High Alloys [PDF]
The purpose of this study was to investigate the effect of silicon and iron on the weldability of HAYNES HR-160{reg_sign} alloy. HR-I60 alloy is a solid solution strengthened Ni-Co-Cr-Si alloy. The alloy is designed to resist corrosion in sulfidizing and other aggressive high temperature environments.
Maroef, I
openaire +4 more sources
MAG Welding Tests of Modern High Strength Steels with Minimum Yield Strength of 700 MPa
The modern high strength steel plates have an excellent combination of strength and toughness based on micro-alloying and complex microstructure. Retaining this combination of properties in the weld zone is a major challenge for applications in high ...
Teemu Lahtinen +3 more
doaj +1 more source
Assessment of Steel Subjected to the Thermomechanical Control Process with Respect to Weldability
The study is concerned with the assessment of the weldability of steel S700MC subjected to the thermomechanical control process (TMCP) and precipitation hardening and characterised by a high yield point.
Jacek Górka
doaj +1 more source
Weldability of Electroformed Nickel [PDF]
An investigation was conducted to identify the cause of variations in the weldability of electroformed nickel. Evaluation of gas tungsten-arc welds in 0.254-mm-thick electroformed nickel sheet by chemical analyses of the nickel base material identified ...
Frye, L. D.
core +1 more source
In joining aluminum alloy to galvanized (GI) steel, the huge gap of thermophysical properties, defects by zinc from the steel surface, and formation of excessive brittle Fe-Al intermetallics (IMC) are the main factors that deteriorate the joint quality ...
Seong Min Hong +3 more
doaj +1 more source
Additive manufacturing (AM) processes are playing a significant role in several industrial sectors such as construction and machine building industries, involving a wide variety of metallic materials. Among these, the AM of aluminium alloys has developed
Rafael Nunes +7 more
doaj +1 more source
The weldability of ductile iron, as widely known, is relatively poor, essentially due to its typical carbon equivalent value. The present study was developed surrounding the heat treatability of welded joints made with a high strength ductile cast iron ...
Ronny M. Gouveia +6 more
doaj +1 more source
Weldability and Damage Evaluations of Fresh-to-Aged Reformer Furnace Tubes
The microstructures and tensile properties of fresh and aged reformer furnace tubes and a fresh-to-aged welded joint were investigated to assess the weldability of fresh-to-aged reformer furnace tubes.
Chengming Fuyang +6 more
doaj +1 more source

