Results 71 to 80 of about 911 (165)
Determination of bending moment resistance of t-type joints constructed with wood biscuit [PDF]
Iranian Journal of Wood and Paper Industries, 2014 The goal of this study was to investigate effects of wood species (Beech and Fir), number of connectors (1 and 2), size of biscuit (10 and 20) and type of adhesives (Polyvinyl acetate (PVAc), polyurethane (PU) and urea-formaldehyde (UF)) on bending ...
Mohammad Kahvand +2 more
doaj
Simulating Strength Behaviors of Corner Joints of Wood Constructions by Using Finite Element Method
Drvna Industrija, 2016 Using finite element method (FEM) has become wide spread in the field of wood mechanics for analyzing difficult problems instead of conventional methods. The objective of this study is to determine the strength properties of wood corner joints using FEM.
Bulent Kaygin +2 more
doaj +1 more source
Double vs. Single Shear in Dowelled Timber Connections Under Fire Conditions, Thermal Analysis
FireThe main aim of this work is to compare double- or single-designed connections with wooden members and internal steel fasteners under fire conditions.
Elza M. M. Fonseca
doaj +1 more source
BioResourcesComposite materials, edge banding, and wooden dowels are being used in inner decorations and the construction of furniture frames. However, there is little information available concerning the withdrawal strength of various fasteners and in particular ...
Abdurrahman Karaman +2 more
doaj
Industrial Crops and ProductsWooden dowels are emerging as a promising alternative or complement to adhesives in adhesive-free timber products and pure-wood structural joints. The performance of these connections is critically governed by the mechanical properties of the dowels ...
Angelo Aloisio +4 more
doaj +1 more source
Reconstruction of Wooden Sleepers by Fitting in Plastic Screw Dowels
Promet (Zagreb), 2012 Over three million wooden sleepers are built into the Croatianrailway tracks. The durability of these sleepers depends verymuch on the fastening between the sleepers and the rails providedby the sleeper screws. The author suggests various systemsfor the fastening of the sleepers and the rails, especial~v in caseof the old ones, and particularly using ...
openaire +1 more source
Parameter Identification Procedure for Hysteretic Shear-Resistant Properties of Beech Wood Dowels
BioResourcesTo evaluate the shear-resistant behavior of wooden dowels used in Blockhaus shear walls under cyclic load, 19 specimens under ten groups of conditions were prepared and tested.
Jiwei Liu +4 more
doaj +2 more sources
Modeling of fire performance of timber structures assembled with densified wooden dowels
, 2021 As part of a European project, a new assembly using densified dowels to hold wooden slats is currently being validated at the structural level. This type of assembly has the advantage of not using glues and of making it possible to manufacture large-sized structures consisting only of wood.
openaire +1 more source
Maderas: Ciencia y TecnologíaTraditional and alternative joining techniques have been used for many years at the connection points of structural bearing systems. Especially, glued doweled and screwed type mechanical connections are widely used in wooden structures and furniture ...
Tolga Kuskun
doaj +1 more source
Countermovement, Hurdle, and Box Jumps: Data-Driven Exercise Selection. [PDF]
J Funct Morphol Kinesiol, 2023 Janikov MT +3 more
europepmc +1 more source