Effect of Oil Content on Hairiness of Jute Yarn
168-169At 4% oil content the yarn produced a minimum number of hairs per unit length and below and above this oil content the hairiness increased greatly. With total omission of oil in the yarn, the hairiness was maximum.
Ghosh, S N +3 more
core
Determining fibre properties and linear density effect on cotton yarn hairiness in ring spinning
The hairiness of a yarn can be defined as the total number or total length of the fibres which leave from the unit yarn's surface. Yarn hairiness is formed by surface fibre edges which leave the yarn center and spoil its appearance.
Altas, Sevda, Kadoglu, Hueseyin
core
Effect of repeated winding on carded ring cotton yarn properties
In this study, ten carded ring spun cotton yarns were subjected to windings. Yarn hairiness, fineness, unevenness and tensile properties were then examined. Results showed that the majority of the increased yarn hairiness occurred at the beginning cycles
Xin Wang +9 more
core +1 more source
Cotton’s environmental impact due to high water, fertilizer, and pesticide use is a concern despite the rising demand for natural fibers; however, significant research on different natural fiber blends is lacking.
Mariam Jabbar +4 more
doaj +1 more source
Influence of Spinning Parameters and Recovered Fibers from Cotton Waste on the Uniformity and Hairiness of Rotor Spun Yarn [PDF]
Improving raw material exploitation has become the most important challenge facing scientific and industrial community. In this paper, we have studied the effect of percentage of fibres recovered from cotton wastes and different spinning parameters on ...
Halimi Mohamed Taher, Ph.D. +3 more
doaj
Hairiness of Jute Yarn: Part III-Effects of Fibre Fineness, Strength, Diameter and Yarn Tenacity
71-74The effects of air-flow fineness, gravimetric fineness, diameter and bundle tenacity of fibres and yarn tenacity on the hairiness of jute yarn were examined. Hairiness increased significantly with increase in gravimetric fineness, whereas the air-
Ghosh, S N +3 more
core
Spinning Optimization of Fine Cashmere Yarns: Influence of Fiber Preparation and Spinning Technology
Cashmere is recognized as one of the most valuable natural fibers due to its softness, fineness, and valuable properties. However, the production of fine cashmere yarns remains technically challenging due to the intrinsic variability of fiber ...
Wafa Mahjoub +3 more
doaj +1 more source
Measuring the hairiness of a rotor-spun yarn on the Uster Tester 3 at different speeds
A low-twist rotor-spun yarn of 18.5 tex was tested for yarn hairiness and evenness on an Uster Tester 3 at speeds of 25, 100, and 400 m/min. Both spinning and rewound packages were tested. The results show that yarn hairiness measured at 25 and 100 m/min
X Wang (1378959)
core
Influence of movable balloon control ring on yarn hairiness of different yarn paths
Influence of movable balloon control ring on yarn hairiness of different yarn ...
H Guo (7070417) +3 more
core
The Effect of Tow Stretch Breaking Process Parameters on High-Bulk Acrylic Yarn Properties
This study represents the first comprehensive investigation examining how oven temperature and drawing ratios, two key tow stretch-breaking parameters, influence the properties of high-bulk acrylic yarns.
Kenan Yildirim +4 more
doaj +1 more source

