Functional coatings made of eco-friendly materials [PDF]
E3S Web of Conferences, 2023 Thermal barrier coatings protect alloys (for example, in turbine blades) from extreme temperatures. There is a pressing need to find better materials than currently used yttria-stabilized zirconia (i.e.
Solodovnikov Sergey +3 more
doaj +1 more source
Effect of 1 wt% LiF additive on the densification of nanocrystalline Y2O3 ceramics by spark plasma sintering [PDF]
, 2011 Densification of nanocrystalline cubic yttria (nc-Y2O3) powder, with 18 nm crystal size and 1 wt% LiF as a sintering additive was investigated. Specimens were fabricated by spark plasma sintering at 100 MPa, within the temperature range of 700–1500 °C ...
Chaim, Rachman +3 more
core +2 more sources
High-translucent yttria-stabilized zirconia ceramics are wear-resistant and antagonist-friendly.
Dental Materials, 2019 OBJECTIVES To evaluate two-body wear of three zirconia ceramics stabilized with 3, 4 and 5mol% yttria and to compare their wear behavior with that of a lithium-disilicate glass-ceramic.
Fei Zhang +7 more
semanticscholar +1 more source
Structural characterization of YBa(2)Cu(3)O(7)/Y(2)O(3) composite films
, 1997 Using 4-circle x-ray diffraction and transmission electron microscopy we have studied the microstructure and in-plane orientation of the phases present in thin film composite mixtures of YBa(2)Cu(3)O(7) and Y(2)O(3).
Broussard, P. R. +2 more
core +1 more source
X-ray photoemission spectroscopy determination of the InN/yttria stabilized cubic-zirconia valence band offset [PDF]
, 2007 The valence band offset of wurtzite InN(0001)/yttria stabilized cubic-zirconia (YSZ)(111) heterojunctions is determined by x-ray photoemission spectroscopy to be 1.19±0.17 eV giving a conduction band offset of 3.06±0.20 eV.
C. E. Kendrick +8 more
core +2 more sources
Investigation on the Mechanical Properties of Mg-Al Alloys (AZ41 and AZ51) and Its Composites
Metals, 2012 In the present study, AZ41 and AZ51 alloys were fabricated using disintegrated melt deposition technique followed by hot extrusion. AZ41/Yttria and AZ51/Yttria composites were prepared using 0.6 wt% yttria nano particles in the alloys using the same ...
Manoj Gupta +4 more
doaj +1 more source
Cavitation-assisted decontamination of yttria from graphite of different densities
Ultrasonics Sonochemistry, 2021 Yttria coated graphite crucibles are widely used to handle molten refractory and radioactive metals like uranium and plutonium. However, the coated layer suffers damages like cracking and peeling off owing to thermal cycles.
S. Lahiri +4 more
doaj +1 more source
Effect of Y2O3 Nanoparticles on Corrosion Study of Spark Plasma Sintered Duplex and Ferritic Stainless Steel Samples by Linear Sweep Voltammetric Method [PDF]
Archives of Metallurgy and Materials, 2018 The microstructure and corrosion properties of spark plasma sintered yttria dispersed and yttria free duplex and ferritic stainless samples were studied. Spark plasma sintering (SPS) was carried out at 1000°C by applying 50 MPa pressure with holding time
R. Shashanka +2 more
doaj +1 more source
Crack Growth Tests in Air Plasma-Sprayed Yttria Coatings for Alumina Ceramic Matrix Composites
Ceramics, 2019 Yttria coatings for all-oxide combustor walls were tested for their crack-growth behavior. These environmental and thermal barrier Y2O3-coatings were processed by atmospheric plasma spraying (APS). The stiffness and strength were measured for as-received
Stefan Hackemann, Marion Bartsch
doaj +1 more source
Clinical and Experimental Dental Research, 2022 Objectives Mechanical properties are cardinal for the long‐term clinical success of laminate veneer restorations but the selection of new restorative materials should ideally be based on clinical evidence, therefore, in vitro testing of dental materials ...
Ali Dhahee Malallah, Nadia H. Hasan
doaj +1 more source