Results 31 to 40 of about 141,194 (208)

Study on Thixojoining Process Using Partial Remelting Method

open access: yesAdvances in Materials Science and Engineering, 2013
Cold-work tool steel is considered to be a nonweldable metal due to its high percentage content of carbon and alloy elements. The application of a new process of the semisolid joining of two dissimilar metals is proposed. AISI D2 cold-work tool steel was
M. N. Mohammed   +3 more
doaj   +1 more source

Electron Beam Surface Remelting of AISI D2 Cold-Worked Die Steel

open access: yes, 2002
Electron beam surface remelting has been carried out on AISI D2 cold-worked die steel. The microstructure and hardening behavior of the electron beam surface remelted AISI D2 cold-worked die steel have been studied by means of optical microscopy and ...
宋仁国   +3 more
core   +1 more source

Pengaruh Variasi Waktu Proses Manganisasi Terhadap Kekerasan dan Ketebalan Lapisan pada Baja Perkakas AISI D2

open access: yes, 2020
Pengerasan permukaan telah digunakan secara luas pada berbagai macam baja, karena dapat memberikan kombinasi sifat keras pada bagian permukaan. Pengerasan permukaan yang dilakukan adalah dengan cara mengubah struktur mikro dan komposisi kimia secara ...
Pawawoi   +5 more
core   +1 more source

Effects of Multiple Quenching Treatments on Microstructure and Hardness of O2, D2, and D3 Tool Steels

open access: yesJournal of Manufacturing and Materials Processing
The effects of multiple austenitizing and quenching (AQ) thermal cycles on the microstructure and hardness of AISI O2 (90MnCrV8), D2 (X153CrMoV12), and D3 (X210Cr13) tool steels were systematically investigated.
Emanuele Ghio   +2 more
doaj   +1 more source

Microstructure and Mechanical Properties of High-Strength Tool Steels [PDF]

open access: yesArchives of Metallurgy and Materials
In this study, high-strength tool steel specimens based on AISI D2 with a C content of 1.6% or more were developed by adjusting alloying elements (C, Cr, Mo, and V).
Hong-Gu Lee   +5 more
doaj   +1 more source

Analysis of AISI D2 Steel by using SEM Images

open access: yesInternational Journal of Recent Technology and Engineering, 2020
Hard turning is a new emerging technique in manufacturing industry which involves turning of hard steel having hardness more than 60 HRC. Here in the present work, the objective of the study is steel type ENX160CrMo having hardness 62 HRC. Hard turning were carried out at different cutting parameters and chip hardness and micro- chip SEM images were ...
openaire   +1 more source

CRYOGENIC AND STRESS RELIEF THERMAL TREATMENTS IN AN AISI D2 STEEL [PDF]

open access: yesTecnologia em Metalurgia, Materiais e Mineração, 2012
The effects of cryogenic treatments on an AISI D2 cold work tool steel using X-ray diffraction from syncronton radiation are studied. The aim of this work is to verify the effects of: i) time at cryogenic temperatures (3, 10 and 30 hours); ii ...
Paula Fernanda da Silva Farina   +3 more
doaj   +1 more source

Study of Short Times Tempering for AISI D2 Cold Work Tool Steel

open access: yesMaterials Research, 2023
Short time tempering has been applied to steels to improve toughness keeping the hardness at the same level. For AISI D2 tool steel, typical thermal cycles are quench and temper.
Maycoln D. Conci   +3 more
doaj   +1 more source

Ultrasonic Vibration Assisted Laser Processing: A Hybrid Paradigm for Extreme Surface Enhancement

open access: yesRare Metals, Volume 45, Issue 10, October 2026.
ABSTRACT Traditional laser processing techniques offer many advantages, but they often encounter limitations such as heat‐affected zones, recast layers, residual tensile stresses, and poor surface finish. The integration of ultrasonic vibration (UV) presents a promising hybrid approach to overcome these challenges by introducing beneficial effects like
Aziz Ul Hassan Mohsan   +6 more
wiley   +1 more source

Characterization of layers produced by PVD-boriding and boriding on AISI H13 and AISI D2 steels

open access: yes, 2018
Neste trabalho foram produzidas camadas de boretos de elevadas durezas e resistências ao desgaste nos aços AISI H13 e AISI D2, por meio de tratamento termo-reativo em banho de bórax com adição de 10% de alumínio.
Pereira, Ricardo Gomes
core   +1 more source

Home - About - Disclaimer - Privacy