Results 261 to 270 of about 195,722 (305)
Some of the next articles are maybe not open access.
R-Curves in Al2O3 - Al2O3/ZrO2 laminates
2005In order to better understand the fracture behavior of Al2O3-Al2O3/ZrO2 laminates, controlled crack growth experiments were carried out. The method proposed consists of a three-point bending test of a sandwich beam in which a notched specimen is located in between two metallic bars.
J Pascual, F Chalvet, T Lube, G de Portu
openaire +2 more sources
Fabrication and optical properties of nanostructured plasmonic Al2O3/Au-Al2O3/Al2O3 metamaterials.
Nanotechnology, 2018Discontinuous multilayer (DML) thin films, which consist of nano-granular metals (NGMs) embedded in a dielectric matrix, have attracted significant interest as engineered plasmonic metamaterials. In this study, a systematic layer-by-layer deposition of three-dimensional sub-wavelength periodic plasmonic DML structures via the radio frequency sputtering
H, Bakkali +3 more
openaire +1 more source
Calorimetric Study of Interaction Between Oxygen and β-Al2O3, β-Al2O3+Au and β-Al2O3+Pt
Journal of Thermal Analysis and Calorimetry, 2002In an attempt to improve the understanding of the electrochemical effects observed on an original potentiometric gas sensor, interactions of oxygen with the device were investigated. These calorimetric measurements have evidenced the existence of a weakly bounded endothermal oxygen species.
Guillet, Nicolas +2 more
openaire +3 more sources
Applied Catalysis B: Environmental, 2013
Abstract Pt, Pd, Rh and V2O5 metallic monolith catalysts supported on Al2O3, Al2O3–TiO2 and Al2O3–CeO2 were examined in the oxidation of dichloromethane (DCM). To improve the selectivity towards HCl and to prevent catalysts’ deactivation, the water amount in the feed gas mixture was adjusted to 1.5 wt.%.
Pitkäaho, S. +4 more
openaire +2 more sources
Abstract Pt, Pd, Rh and V2O5 metallic monolith catalysts supported on Al2O3, Al2O3–TiO2 and Al2O3–CeO2 were examined in the oxidation of dichloromethane (DCM). To improve the selectivity towards HCl and to prevent catalysts’ deactivation, the water amount in the feed gas mixture was adjusted to 1.5 wt.%.
Pitkäaho, S. +4 more
openaire +2 more sources
The Journal of Chemical Thermodynamics, 2013
Abstract All available thermodynamic and phase diagram data for the condensed phases of the (Al 2 O 3 + Na 2 O), (Al 2 O 3 + Na 2 O + SiO 2 ), and (Al 2 O 3 + Na 2 O + AlF 3 + NaF) systems have been critically assessed. Model parameters for solid solutions and a single set of parameters for the liquid solution in the binary, ternary, and ternary ...
Guillaume Lambotte, Patrice Chartrand
openaire +1 more source
Abstract All available thermodynamic and phase diagram data for the condensed phases of the (Al 2 O 3 + Na 2 O), (Al 2 O 3 + Na 2 O + SiO 2 ), and (Al 2 O 3 + Na 2 O + AlF 3 + NaF) systems have been critically assessed. Model parameters for solid solutions and a single set of parameters for the liquid solution in the binary, ternary, and ternary ...
Guillaume Lambotte, Patrice Chartrand
openaire +1 more source
Acetone hydrogenation over co-precipitated Ni/Al2O3, Co/Al2O3 and Fe/Al2O3 catalysts
Journal of the Chemical Society, Faraday Transactions, 1998Co-precipitated Ni/Al2O3, Co/Al2O3 and Fe/Al2O3 catalysts containing 10–50 wt.% of metal are prepared and characterized by BET surface area, pore volume and XRD. Hydrogen chemisorption and oxygen uptake measurements are used to estimate the extent of reduction and the available surface metal sites. Acetone hydrogenation under vapour phase conditions is
Sankarasubbier Narayanan +1 more
openaire +1 more source
In-Situ Reaction Depposition Coating of LaPO4 on Al2O3 Fabric Cloth for Al2O3/Al2O3 Composites
2008In-situ reaction deposition, a liquid-phase coating method, was applied to coat monazite (LaPO 4 ) on alumina fabric cloth for improving the uniformity of coating. Coating was characterized for thickness, microstructure and composition by SEM, XRD and EDS. Stability of the coating was estimated by heat exposure at 1200 °C for 48 h in air.
Toyohiko Yano +2 more
openaire +1 more source
Tunnelling cracks in Al2O3/Al2O3–ZrO2 layered composites
Journal of the European Ceramic Society, 2007Two sizes of symmetrical, five-layered ceramic composites with alumina surface layers and alumina–zirconia inner layers were produced. Each composite had the same sequence and composition of individual layers; however, the measured strength of the large-sized sample was only 76 MPa to 115 MPa.
S. Beranič Klopčič +3 more
openaire +1 more source
Optical dielectric functions for amorphous Al2O3 and γ-Al2O3
Journal of Applied Physics, 1988Using the classical oscillator model, the optical dielectric functions for amorphous alumina (a-Al2O3) and gamma alumina (γ-Al2O3) thin films prepared by ion implantation and subsequent annealing of sapphire (α-Al2O3) substrates were determined for the first time from analysis of infrared reflection spectra.
Y. T. Chu +3 more
openaire +1 more source
2008
A liquidus surface for the Al2O3-rich corner of the Al2O3???HfO2???Gd2O3 system is constructed. No ternary compounds were found in the system under study. The ternary transformation point and the ternary eutectic point are discovered. The ternary eutectic Al2O3???GdAlO3???F-HfO2 exhibits the cooperative phase growing mechanism which allows one to ...
openaire +1 more source
A liquidus surface for the Al2O3-rich corner of the Al2O3???HfO2???Gd2O3 system is constructed. No ternary compounds were found in the system under study. The ternary transformation point and the ternary eutectic point are discovered. The ternary eutectic Al2O3???GdAlO3???F-HfO2 exhibits the cooperative phase growing mechanism which allows one to ...
openaire +1 more source

