Results 11 to 20 of about 2,898,126 (296)
Ultimate axial load capacity of v-band clamp joints. [PDF]
, 2009 Band clamps with a flat bottomed V-section are used to connect a pair of circular flanges to provide a joint with significant axial strength. Despite the wide application of V-band clamps, their behaviour is not fully understood and the ultimate axial ...
Barrans, Simon, Muller, M
core +5 more sources
Impact of flange geometry on the ultimate axial load capacity of V-band clamps [PDF]
, 2010 Modern turbochargers typically comprise a body in three parts; the turbine and compressor housings and the bearing housing. The preferred method of joining these three parts, in automotive applications, is to use a band clamp with a flat bottomed V ...
Barrans, Simon, Muller, Matthias
core +5 more sources
Residual Axial Behavior of Restrained Reinforced Concrete Columns Damaged by a Standard Fire
Fire, 2022 A simplified procedure to predict the residual axial capacity and stiffness of both rectangular and circular reinforced concrete (RC) columns after exposure to a standard fire provides the means to replace the current descriptive methods.
Mohamed Monir A. Alhadid +1 more
doaj +1 more source
Bi-Directional Static Load Tests of Pile Models
Applied Sciences, 2020 This work examined a new method of bi-directional static load testing for piles, referencing the Osterberg test. Measurements were taken, on a laboratory scale, using six models of piles driven into a box filled with sand.
Michał Baca +2 more
doaj +1 more source
Axial Bearing Capacity of the Expander Body Pile
Soils and Foundations, 1985 ABSTRACT A new type of pile, the expander body pile, is described in the paper. This new pile can be used for underpinning of structures which have been damaged, for example, by excessive settlements. The pile consists in principle of a folded steel sheet, the expander body, which is wrapped around the lower part of a steel pipe pile.
BROMS, BENGT B., NORD, BERTIL
openaire +2 more sources
Predicting The Axial Load Of Capacity Of Joints Formed By V-Band Retainers [PDF]
V-band retainers are widely used in the automotive, aircraft and aerospace industries to connect a pair of circular flanges to provide a joint with good axial strength and torsional rigidity.
Blunt, Liam, Müller, M.
core +5 more sources
Axial Capacity Estimation of FRP-strengthened Corroded Concrete Columns [PDF]
Journal of Soft Computing in Civil EngineeringThis research presents a machine learning (ML) based model to estimate the axial strength of corroded RC columns reinforced with fiber-reinforced polymer (FRP) composites.
Chandan Gupta +5 more
doaj +1 more source
International Journal for Computational Civil and Structural Engineering, 2023 Axial bearing capacity is an important factor in designing of foundation. It must be able to carry the load of upper structure without any significant deformation due to important role in pile design.
Tsaana Khoirunisaa +2 more
doaj +1 more source
Advances in Civil Engineering, 2021 The axial compressive performance of steel-reinforced concrete columns with monosymmetric cross-shaped steel (SRCC-MCS) was investigated in this study.
Jipeng Yu +3 more
doaj +1 more source
THE EFFECT OF AXIAL COMPRESSION RATIO ON SEISMIC BEHAVIOR OF INFILLED REINFORCED CONCRETE FRAMES WITH PROFILED STEEL SHEET BRACING [PDF]
Civil Engineering Journal, 2018 Seven infilled reinforced concrete (RC) frames strengthening with profiled steel sheet bracing are researched on the effect of axial compression ratio (0.3~0.9).
FENG Ningning +3 more
doaj +1 more source