Results 11 to 20 of about 189,459 (306)
Rock Uniaxial Compression Test and Axial Splitting
Procedia Engineering, 2017 Abstract Axial splitting is an important failure mechanism in rock engineering. This failure mechanism is particularly observed in the vicinity of free surfaces of rock structures. Different possibilities such as existence of defects, pores and micro-cracks in the rock specimen have been attributed as the cause of axial splitting in the literature ...
Ali Fakhimi, Behzad Hemami
openaire +3 more sources
Research on the mechanical properties of concrete stub column under axial compression loading with square steel tube self-compacting iron tailing [PDF]
E3S Web of Conferences, 2020 In this paper, the influence of steel rate and substitution rate of iron tailing powder on the bearing capacity of the stub columns is mainly investigated through the test of five concrete stub columns under axial compression loading with square steel ...
Wang Yuan Xi, Du Xi Kai, Liu Jing Hong
doaj +1 more source
Frontiers in Surgery, 2023 BackgroundTo compare the biomechanical parameters of AO/OTA type A3 distal femoral fractures fixed bilaterally with a bridge combined fixation system (BCFS) and lateral locking compression plate + locking reconstruction plate (LCP + LRP).MethodsTwelve A3
Jianke Liu +7 more
doaj +1 more source
Behaviour and design of composite beams subjected to negative bending and compression [PDF]
, 2012 This paper investigates the behaviour of steel–concrete composite beams subjected to the combined effects of negative bending and axial compression. Six full-scale tests were conducted on composite beams subjected to negative moment while compression was
Kirkland, Brenadan +3 more
core +1 more source
International Journal of Analytical Chemistry, 2022 In order to solve the problem of seismic performance of prefabricated concrete shear walls connected with ultra-high performance cement-based composite (UHPC) after short lap of steel bars, the author proposes a cement-based composite nanomaterial in the
Xiaoxu Chen +3 more
doaj +1 more source
Case Studies in Construction Materials, 2023 A new type of stay-in-place formwork column (SFC) was proposed. The square prefabricated shell was made of basic magnesium sulfate cement based composite (BMSCC) and reinforced by angle steel frame. The SFC can be formed after ordinary concrete is poured.
Xiaodong Wang, Fengjun Ren
doaj +1 more source
Observation of Microscopic Deformation Behavior of Cork [PDF]
, 2003 Cork is a material that has many characteristics, for instance, light weight, elasticity, insulation against heat, impermeability for liquid, and so forth. There are two types of cork, the natural and the agglomerated corks.
Abe, Takeji, Sato, Takashi
core +1 more source
Hydrostatic compression on polypropylene foam [PDF]
, 2014 Models currently used to simulate the impact behaviour of polymeric foam at high strain rates use data from mechanical tests. Uniaxial compression is the most common mechanical test used, but the results from this test alone are insufficient to ...
VIOT, Philippe
core +2 more sources
Influence of Elastomer Layers in the Quality of Aluminum Parts on Finishing Operations [PDF]
, 2020 In finishing processes, the quality of aluminum parts is mostly influenced by static and dynamic phenomena. Different solutions have been studied toward a stable milling process attainment.
Lamikiz, Aitzol +3 more
core +2 more sources
Scientific Reports, 2022 In order to study the axial compression performance for composite hollow column of steel fiber, high-strength lightweight aggregate concrete and angle steel, the axial compression tests were carried out on five composite hollow columns of steel fiber ...
Zehui Xiang +3 more
doaj +1 more source