Results 1 to 10 of about 1,153 (156)
Study on microstructure and mechanical properties of 3003 aluminum alloy joints brazed with Al–Si–Cu–Ni paste brazing materials [PDF]
Scientific ReportsPaste-type brazing materials have advantages such as adjusting the complexity of the parts to be soldered, easy storage and production in certain quantities. They can be used for brazing heat exchangers, liquid tanks and corrosion resistant parts.
Zeng Gao +5 more
doaj +2 more sources
Effect of Brazing Temperature on the Microstructure and Mechanical Properties of Stainless Steel 316 Joint Brazed by BNi2 [PDF]
علوم، فناوری و کاربردهای فضایی, 2022 Many factors affect the quality of brazing process, including temperature, time, clearance, surface roughness and alloy elements. Actually, they influence on the formation of intermetallic compounds in brazed joints.
Yaser Vahidshad, Faegheh Soltanmohammad
doaj +1 more source
Metals, 2023 5A06 aluminum alloy bar was brazed by temperature gradient transient liquid phase diffusion welding (TG-TLP). The effects of brazing temperature on the microstructure and the tensile strength of the brazing joints were investigated. Three typical brazing
Yi Chen +6 more
doaj +1 more source
Dissolution and Erosion Phenomena in the Brazing of Aluminum Heat Exchangers [PDF]
Archives of Metallurgy and Materials, 2021 On the basis of research, the mechanisms of dissolution and erosion during brazing of aluminium alloys and the influence of these phenomena on brazed joints of heat exchangers are presented.
Z. Mirski, J. Pabian, T. Wojdat
doaj +1 more source
Study on Vacuum Brazing Technology of Polycrystalline Diamond and High Speed Steel [PDF]
Cailiao Baohu, 2021 In order to realize the connection between polycrystalline diamond (PCD) and high speed steel, Ag-Cu-Ti-In solder was used for vacuum brazing. The brazing temperature, heating current and holding time were selected as experimental factors by Box-Behnken ...
WU Qi-liang, YU Ai-bing, SUN Lei, ZHAO Shuo, LI Yi, LI Jian-yong
doaj +1 more source
Research progress in high-entropy alloys used in brazing and surface engineering fields
Cailiao gongcheng, 2021 With the improvement of alloy manufacturing level and the complexity of performance requirements, high-entropy alloys (HEAs) have gradually attracted great attention.At present,the research in the field of material processing mainly focuses on brazing ...
LI Hong +4 more
doaj +1 more source
Crystals, 2020 The microstructure and mechanical properties of brazing SiC ceramic with Zr-Cu filler metal under different brazing parameters (brazing temperature, holding time) were investigated. The phase of the joint reaction interface between Zr-Cu filler metal and
Bofang Zhou +4 more
doaj +1 more source
Metals, 2020 The joining methods of Aluminum matrix composites reinforced with SiC particles (SiCp/Al MMCs) are a challenge during the manufacturing process due to the significant differences between SiC particles and base aluminum in terms of both physical and ...
Dechao Qiu +4 more
doaj +1 more source
Vacuum High-Temperature Brazing of 3003 Aluminum Alloy
Журнал інженерних наук, 2023 Brazing filler metals based on the Al-Si system are widely used for brazing aluminum alloys. Their melting point is 577 °С (eutectic). It is necessary to conduct comprehensive studies of the technological properties of experimental filler metals and ...
Makymova S. V. +3 more
doaj +1 more source
Cailiao gongcheng, 2016 Tension-shear test was carried out on middle temperature self-brazing aluminum honeycomb cores after high temperature aging by micro mechanical test system, and the microstructure and component of the joints were observed and analyzed using scanning ...
ZHAO Huan +4 more
doaj +1 more source