Results 181 to 190 of about 2,691,137 (248)
Hydrogen‐enhanced SCC of WAAM Inconel 625 in 3.5 wt.% NaCl solution. Hydrogen charging reduces passive film stability (lower corrosion potential) and promotes pitting at Laves phase/matrix interfaces. Stress corrosion cracks propagate along Laves‐rich regions, leading to quasi‐cleavage brittle fracture.
Xu Zhang +5 more
wiley +1 more source
Effect of Heat Treatment on Hydrogen Embrittlement of Electrodeposited Copper
This work explores how entrapped hydrogen can cause embrittlement of copper, although this embrittlement is only evidenced during slow strain testing. We demonstrate that significant amounts of hydrogen are trapped in nano‐cavities and investigate the impact of heat treatment in changing the hydrogen distribution and the resulting embrittlement ...
Hamidreza M. Shirazi +9 more
wiley +1 more source
Corrosion Rate and Stress Corrosion Cracking Susceptibility of Copper in the Presence of Sulfides
This study investigates copper corrosion behavior and stress corrosion cracking (SCC) susceptibility using immersion, U‑bend, and slow strain rate tests in sulfide‑containing synthetic seawater exposed to H2S/N2 mixed gas, with varying H2S gas fraction, focusing on long‐term corrosion performance and SCC susceptibility relevant to bentonite‐buffered ...
Shingo Watari +6 more
wiley +1 more source
Polycarbonate Vitrimers and Dynamic Co‐Networks From Epoxide/Carbon Dioxide Copolymerization
This work demonstrates how CO2‐derived poly(propylene carbonate) and poly(cyclohexene carbonate) backbones influence vitrimer thermo‐mechanical behavior. By tuning backbone composition, epoxide crosslinker chemistry and blend ratios, the crosslinked materials span a wide property window, from highly extensible to stiff, glassy networks, establishing an
Satej S. Joshi +3 more
wiley +1 more source
Rheological Assessment of Polymer Melts and Networks: From Degradation to Recyclability
Rheology provides a powerful analytic tool for tracking polymer degradation and structural evolution across manufacturing, service, and recycling. Linear and nonlinear rheological techniques reveal changes in molecular architecture, network stability, and processing history.
Haocong Shi +4 more
wiley +1 more source
Overlap percentage governs the remelting, dilution, and solidification behavior of CMT‐WAAM AISI 308L stainless steel. Increasing overlap to 50% promotes stronger bead‐to‐bead bonding, wider transition zones, and localized hardness enhancement, with the highest hardness observed in the overlap region due to grain refinement and δ‐ferrite redistribution.
Mojtaba Karamimoghadam +4 more
wiley +1 more source
This work reports the fast hot‐pressing sintering of precursor‐derived amorphous SiC raw powders to prepare HfC‐reinforced SiC nanoceramic with coherent HfC/SiC interfaces. Through the synergistic effects of nanocrystallization strengthening and interface engineering, the simultaneous enhancement of three typically competing mechanical properties, that
Shiyu Yin +12 more
wiley +1 more source
Wear‐activated surface engineering of TPU/GNP nanocomposites through improved filler dispersion and interfacial anchoring of functionalized graphene nanoplatelets, leading to finer post‐abrasion textures and enhanced ice traction. ABSTRACT Graphene‐reinforced thermoplastic polyurethane (TPU) composites offer a promising route for developing ...
Sara Zahmatkesh +2 more
wiley +1 more source
Overprinting filament from recycled composites with surface treatment for flat substrate and curved substrate. ABSTRACT This study presents a sustainable 3D overprinting approach for recycling of discontinuous carbon fibers from both thermoset and thermoplastic composites, incorporating a stable fiber surface treatment with polydopamine/silica ...
Yahui Lyu +4 more
wiley +1 more source
TrGO–Ni/Co Hybrid Nanocomposites: From Hydrothermal Synthesis to Melt Processing. ABSTRACT Polymeric nanocomposites have attracted significant interest for their low density, processability, and multifunctional properties, making them suitable for applications such as flexible electronics, sensors, biomedical devices, and functional coatings.
Bruno B. Storte +8 more
wiley +1 more source

