Results 31 to 40 of about 330,826 (219)

Low Temperature Combustion Demonstrator for High Efficiency Clean Combustion [PDF]

open access: yes, 2010
The project which extended from November 2005 to May of 2010 demonstrated the application of Low Temperature Combustion (LTC) with engine out NOx levels of 0.2 g/bhp-hr throughout the program target load of 12.6bar BMEP. The project showed that the range of loads could be extended to 16.5bar BMEP, therefore matching the reference lug line of the base ...
openaire   +2 more sources

FIRE CHARACTERISTICS FOR ADVANCED MODELLING OF FIRES [PDF]

open access: yesCivil Engineering Journal, 2016
This paper summarizes the material and fire properties of solid flammable/combustible materials /substances /products, which are used as inputs for the computer numerical fire models. At the same time it gives the test standards for their determination.
Otto Dvořák
doaj   +1 more source

Effect of air-preheating on NOx emissions from a gas turbine combustor [PDF]

open access: yes, 1994
A 76 mm diameter can combustor equipped with a 45° curved-blade radial swirler was used to study the effect of high inlet temperature gas turbine combustion on NOx emission characteristics.
Mustafa, Azeman
core  

Improve Your Boiler's Combustion Efficiency [PDF]

open access: yes, 2006
This revised ITP tip sheet on boiler combustion efficiency provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.
openaire   +2 more sources

The Influence of Dielectric Barrier Discharge Plasma on the Characteristics of Aero-Engine Combustion Chamber

open access: yesXibei Gongye Daxue Xuebao, 2019
A test platform was developed to investigate the performance of aero-engine combustor by the dielectric barrier discharge (DBD) plasma assisted combustion (PAC) in the simulated maximum condition.

doaj   +1 more source

Two-fluid, impinging-sheet injector [PDF]

open access: yes, 1968
Two-fluid, impinging-sheet propellant injector reduces the severe erosion found to occur when ejector elements are directly exposed during throttling without the benefits of a cooling flow of the propellant liquids.
Riebling, R. W.
core   +1 more source

Hydrogen SI and HCCI Combustion in a Direct-Injection Optical Engine [PDF]

open access: yes, 2009
Hydrogen has been largely proposed as a possible alternative fuel for internal combustion engines. Its wide flammability range allows higher engine efficiency with leaner operation than conventional fuels, for both reduced toxic emissions and no CO2 ...
Aleiferis, PG, Rosati, MF
core   +1 more source

Enhancing Propulsion Efficiency: Investigating Pressure Gain Combustion Dynamics in Pulse Detonation Engines [PDF]

open access: yesINCAS Bulletin
In order to obtain important knowledge for raising the performance and efficiency of propulsion systems, in this paper we investigate the dynamics process of pressure gain combustion in the Pulse Detonation Engine.
Mayur PATHAK   +2 more
doaj   +1 more source

A Study Dust Abatement by Combustion [PDF]

open access: yes, 1974
This paper deals with the abatement of the dust, which is produced from combustion of wood which is used in the process in the manufacture of "Bizen Yaki", by means of combustion.
Fujiwara, Tadao, Hirose, Koji
core   +1 more source

Effect of Bluff Body Attributes on Afterburner Combustion Characteristics of a Boron Solid Rocket Scramjet

open access: yesInternational Journal of Aerospace Engineering
In order to improve the combustion efficiency of boron-containing primary gas in the secondary combustion chamber of a solid rocket scramjet and improve engine performance, the effects of different types of blunt bodies, number of rear blunt bodies, and ...
Jiang Ling   +3 more
doaj   +1 more source

Home - About - Disclaimer - Privacy